Islam and the Muslims Essay

In September 2005 Danish newspaper Jyllands-Posten published twelve cartoons including a caricature of Muhammad in a bomb-shaped turban with an ignited fuse. This sparked a huge controversy that affected Muslims and Non-Muslims parts of the world. For the Muslims it was a portrayal of the prophet, Islam and the Muslims as terrorists. They feared that the cartoons might create an anti-Muslim attitude. The Jyllands-Posten apologized and the cartoonist explained that the cartoon was a protest of fundamentalist interpretations of Islam that terrorists use to base their acts on. In citing Free Speech, Jyllands-Posten had crossed the bounds of sensitivity to and respect for other people’s faith or religion. The issue should not be solely taken in the confines of the Danish system. Religion is universal and is held sacred by the believers. A bomb on Mohammad’s head is blasphemous. Given that a number of extremists and fundamentalists have used the teachings of Islam as shield of their terrorist acts, it would be most unfair to say that all Muslims behave and believe as they do. The Organization of the Islamic Conference refused to heed the clamor for death for the cartoonist even if Muslims felt that the cartoon was an insult to Muhammad. Those who thought the cartoons are non-issue as far as discrimination of Muslims is concerned is totally disgusting. Does making fun of all religious’ icons and symbolisms, exempting no one, a legal and moral excuse? Of course it does not. Doing it to all makes it all the more wrong. To the Muslims, Muhammad is revered. He is infallible. To treat him like a cartoon character to elicit fun or humor is not acceptable, it is contemptible. The Danish government’s response to the request for redress by certain Muslim sectors was passive. The courts of law where the prime minister, thru letter, referred them to were likewise evasive. Citing the wide scope of Freedom of Expression in Denmark, they refused to sanction Jyllands-Posten. The courts found no criminal act in the cartoons, for as long as the interpretation of Free Speech included public interest and respect for human rights. The courts were unilaterally in favor of the journalists and cartoonists. What justice left out and disregarded is the Muslim minority’s interest in particular and the Muslim’s human right to their religious beliefs, in general. The reaction or non-reaction of the Danish people and government in the controversy is uncharacteristic of a nation that has been ranked by the Reporters Without Borders as Top in Worldwide Press Freedom Index for 2005. There should be a certain degree of self-restraint in any freedom. It should seek to create, not to destroy. A subject like Religion must be treated with respect and tolerance. It should not be open to debates, opinions and critiques. World reaction to the controversy was predictable. The Muslim countries would be indignant. Denmark would suffer the backlash. Egypt helped diffused the situation in the Middle East. America looked the other way by accusing Syria and Iran of organizing protests and of buying Danish goods after a Muslim boycott. Judging by these reactions, the cartoon controversy was just the tip of the iceberg. Deep-seated political emotions are in the issue. The Muslim terrorists’ politically-motivated acts became religious issues in the cartoon controversy. That the terrorists were Muslims, Islam and Muhammad became the targets of caricaturing. Free Speech has taken a new form. It goes without limit, and anything and everything is fair game. What holds true for Denmark is made to be accepted by the Muslim minority in Denmark and the Muslim majority in the world. Religious figures, beliefs and practices must be left alone. They must not be used as side or main issues in any controversy. The only way to handle differences in religious beliefs is tolerance and respect. One must not be ridiculed and persecuted for his religious convictions. We must learn from the lessons of history. Terrorism must be dealt with a different but civilized option. Reference: Jyllands-Posten Muhhammad Cartoons Controvery, Wikipedia (20 February 2007), http://en.wikipedia.org/wiki/Jylalnds_posten_cartoon_controversy, date accessed: 23. Februrary 2007.

Freud’s Theory of Personality Essay

Sigmund Freud’s theory of personality is both relevant and non-relevant in today’s society. His theory of consciousness is very important as a foundation for understanding human thought and behavior. Freud looked beyond the effects of behavior and explored the unconscious. He significantly changed the way the world views behavior by explaining certain levels of consciousness, the components of the unconscious mind, and different developmental phases. Freud believed that many of our conscious thoughts and actions are motivated by unconscious fears and desires. Sigmund Freud is best known for his development and use of psychoanalysis. The theory of psychoanalysis focuses on the concept of how our unconscious thoughts, feelings, and emotions play an active role in our daily lives. The id, ego, and superego are the three mental zones and each has a specific function. The id functions on the pleasure principle; the ego on the protection of the individual; and the superego on protection of society. Every individual is composed of different amounts of each mental zone. The ultimate goal is to achieve the perfect balance of the three areas by understanding how each works alone and contributes to make the whole. The basis of psychoanalysis is that the unconscious mind determines behavior. One of the biggest concerns in Freud’s psychoanalytic theory is the inability to explain behavior in our modern culture. Freud lived in an era where women were believed to be inferior to men. Freud based his theories on his case studies and direct observations. These observations had limitations because his subjects were Viennese upper-class women; a small portion of society. He focused mainly on the male development; as he was part of a male dominated era which led to half of the population’s development being insufficiently accounted for. Freud lacked an  understanding of women which suggests that his theories involving women are not accurate. The prevalence of same-sex parents raising children in homosexual homes or single-parent households raises questions that psychoanalysis fails to answer and is not relevant in today’s society. Freudian theory suggests that as children develop they progress through a series of psychosexual stages. Each stage has a pleasure-seeking energy that is focused on a different part of the body. The successful completion of each stage leads to a healthy personality as an adult. However, if a conflict remains unresolved at any particular stage, the individual might remain fixated or â€Å"stuck† at that particular point of development. A fixation can involve an obsession with something related to that phase of development. Signs of an oral fixation might include an excessive reliance on oral behaviors such as smoking, biting fingernails or eating. In these modern times, there are over 45 million Americans who smoke and based on Freud’s theory it is a direct result of the way a child went through the teething phase. The idea that a parent who let their child teeth for too long could somehow lead to an individual developing an oral fixation is something that has lost credibility and not relevant today. There are millions of smokers in the United States and very rarely does the blame rest upon the parents who left their kids with a pacifier for too long. Defense mechanisms are a major aspect of psychoanalysis and are relevant in today’s society. When someone seems unwilling to face a painful truth, you might accuse them of being â€Å"in denial.† When a person tries to look for a logical explanation for unacceptable behavior, you might suggest that they are â€Å"rationalizing.† These things represent different types of defense mechanisms, or tactics that the ego uses to protect itself from anxiety. Today we recognize denial as the first and foremost defense mechanism which helps professionals understand an individual’s denial of addictions; such as drugs/alcohol, gambling, and shopping. In conclusion, the profession of psychology would not be where it is today without Sigmund Freud. His contributions to psychology are perhaps some of the most important. Freud’s early work on psychoanalysis as a treatment for  a â€Å"sick† mind paved the way for modern-day psychologists, psychiatrists, theorists, and analysts who are developing this treatment even further. However, he based his theories on events that were exclusive to his time period. In today’s society we have different stressors and live different lifestyles than those living in the 19th and early 20th centuries. They did not know road rage, chemical explosions, pollution, etc. Some changes to consider are focusing on the development of women, study of homosexual and single-parent households, variety of ethnicities/cultures, and environmental concerns just to name a few. References Feist, J., Feist, G., & Roberts, T. (2013). Theories of personality. (8ed., p.19). New York, NY: McGraw-Hill Companies. Lothane, Z. (2006). Freud’s legacy–is it still with us? Psychoanalytic Psychology, 23(2), 285-301. doi:10.1037/0736-9735.23.2.285 Psychoanalysis. (2013). Columbia Electronic Encyclopedia, 6th Edition, 1-2.

Economics for Business Assignment Example | Topics and Well Written Essays - 2000 words

Economics for Business - Assignment Example This makes micro- economic environment more popular among industries which involves influencing of choice through interaction. Thus, micro- economic approach is usually adopted in educational institutions, hospitals and different charitable organizations. External market environment is much dependent on usage of resources. A supportive and adaptive micro- economic environment results in utility maximization as far as consumers are concerned, but most importantly it contributes in profit maximization of firms. By adopting micro- economic approach, business organizations could effectively manage their resource allocation among alternative possibilities. 1Since social trends and customs affect choices of people, organizations require using their resources in a much practical terms. In present times, market mechanisms are merged with state intervention. 1.2 Business objectives are important for numerous reasons. Profit making: Earning profit is the elementary objective of any business. P rofit is earned through a series of business activities. Profit making can further be categorized as ‘maximum profit’ and ‘sufficient profit’. While the former concept supports generation of artificial deficiency, excessive price hikes, adulteration, etc, the later one focuses more on sustenance, prestige and recognition, development and growth of business. In present times, most business organizations adopt the path of sustainable development merged with profit maximization objectives. Creation of customers: Irrespective of type or expansion, every business must expand their customer base. Creation of customer implies generation of potential customers. Amount of such creation is directly proportional to profit making of organization. Thus, customer base is a major determinant in framing of organizational profit- maximizing policies. Advertisements, pricing strategy, and superior quality of goods and services are popular approaches for generation of potenti al customer base. Ensuring customer satisfaction results in customer retention. Innovation: Innovation is the latest mantra in modern business scenario. Changing trends and mindsets have made people more cautious and aware about the goods and services they are purchasing. Thus, marked research, use of newer technologies, customized facilities, and varieties of products have become indispensible for modern customers. Presently, organizations are finding out ways to make use of old products in production of new ones. This contributes in satisfaction quotient of customers belonging to different age groups. Thus, from economic perspective, innovation is as important as marketing, promotion, finance and other business activities. Innovation definitely helps in expansion of business2 Scientific management is the cornerstone of business behavior of modern firms. Every organization maintains certain codes or behavioral principles. Business policy, policy implementation as well as overall be havior of a business depends on numerous aspects. Some of these are- business objective, hierarchy, span of control, labor division and specialization, managerial authority and responsibility, coherence and connection between

Evaluating practice through theories and models Essay - 3

Evaluating practice through theories and models - Essay Example This theory explains when nursing is needed and details how nursing can help in such a way that it appears to the patients as more supportive rather than invasive. As patients become inevitably unable to provide self-care, self-deficit takes place, and this is where the nursing support should come in. In Mr. Tan’s case, the ability to provide self-care is rather impracticable considering the physical limitations caused by his fifth leg amputation. At least, for self-care that requires lateral mobilization, it would be unfeasible for Mr. Tan to take care of himself. According to the Self-Deficit Theory, nursing comes in as an interactional reinforcement that functions to provide healthcare assistance to Mr. Tan. Looking at the situation, Mr. Tan is clearly unable to meet his own self-care requisites such as his universal self-care needs like promotion of normality and physical activities (Bernier 2002); without his wife’s or any other person’s help, he would be unable to serve himself with food, water, or medicine because of his leg amputation. This is where nursing is needed. Orem’s self-deficit theory is most applicable for Mr. Tan’s case because he is already incapable or limited in the provision of continuous effective self care; thus, he nee ds the following methods that Orem identifies as important to respond to this kind of situation: (1) acting for and doing for others: Mr. Tan needs a higher level of comfort and care; (2) Mr. Tan and his wife need guidance when it comes to controlling the disease and appropriate healthcare provisions, especially concerning his medications; (3) He needs support, not just physical but also emotional and psychological; and (4) he needs to be educated about his condition and he can control the degenerative effects of the Diabetes Mellitus to his body (Laferriere 1995 ). Mr. Tan displays a certain degree of hopelessness. His despondency over his condition has manifested in the way he deals with those that

Pride and Prejudice Essay Example | Topics and Well Written Essays - 750 words

Pride and Prejudice - Essay Example Such is one major issue which Elizabeth â€Å"Lizzy† Bennet, the story’s main protagonist, has to deal with in the course of having resolution sought to her initial unfavorable impressions of the male counterpart Mr. Fitzwilliam Darcy while portraying a significant role in the lives and matrimonial affairs of her sisters, especially Jane Bennet. The intricate narrative structure of â€Å"Pride and Prejudice† concerning general manners, education, moral standards, and breeding is set in the fictitious Netherfield Park where the Bennet family resides, particularly in Longbourn. Netherfield is claimed in the novel to be part of Hertfordshire, a county close to London where the arrival of the Bingleys takes place. Austen must have chosen a setting at the countryside in which people of rustic livelihood may be reasonably expected to yearn for occasions of social gatherings like balls or parties which the ladies of the town are specifically delighted with. Under these circumstances would Lizzy Bennet and Mr. Darcy cross paths and begin finding a great deal of conflict as they misjudge each other based on attitudes which are apparently confined within their narrow prejudices. This eventually creates the essence of the theme wherein the traits associated with the ‘pride’ and ‘prejudice’ both of Lizzy and Mr. Darcy are intended to figure a realistic rather than a romantic mode of settlement toward the end. â€Å"Pride and Prejudice† progresses in stages to illustrate the backgrounds and influences crucial to the well-being of the principal characters so that in the process, readers can manage to gain understanding of certain events that occur in a proper English society and how they are dealt with or responded to by people of class, normally by virtue of pride. On one hand Lizzy, being on the extreme end of thought and contemplation of matters, is characterized to possess a modest yet stiff countenance that reflects her high intellectual capacity and seemingly logical suspicion of the hypocrisies and sarcasm in her environment as exemplified in the condescending acts of Miss Bingley and Mrs. Hurst. Mr. Darcy, on the contrary, is featured as a wealthy man utterly reserved and cautious as he maintains quality of stature and pride that he appears incapable of mingling with the ordinary people, inclusive of the Bennets, for which upon Lizzy’s prejudiced observation, he becomes coldly labelled as insensitive despite all achievements and unknown sentiments. Evidently, how Lizzy’s nature functions in the story manifests Austen’s preference to be recognized according to the perspectives of the age of reason. Though she can be felt to acknowledge implicitly the beauty that emerges out of the sweet embellished form of romance between Jane and Mr. Bingley, for the type of novelist she is, Austen greatly considers philosophy in her work and this is naturally conveyed via the rational i nstead of emotional approach the moment Lizzy confronts Mr. Darcy and his gradual move of proposing and expressing affections for Elizabeth. During a dramatic private conversation with Jane, Lizzy confesses: â€Å"Do not be afraid of my running into any excess, of my encroaching on your privilege of universal good will –

History Coursework Example | Topics and Well Written Essays - 2500 words

History - Coursework Example Slaves were assigned a first name only, and after Reconstruction, many of them took on new names, as did Lewis Evans, who said â€Å"the white folks gave me a new name†. America missed the opportunity to create a multiracial society. First, Lincoln missed that chance by legitimizing pro-Union governments in the South that only allowed white men to vote. After Lincoln was assassinated, the new President, Andrew Johnson, took power. He was extremely racist, saying â€Å"Damn the negroes† (textbook, 474). As someone with a class chip on his shoulder, Johnson quickly returned the southern states to the Union, allowing them to enforce Black Codes of law that kept African Americans without property, and with very few legal rights. The former slave narratives include the story of Henry â€Å"Happy Day† Green, Sarah Gray, Lewis Evans and Measy Hudson. Henry Green reports that he voted. The right to vote was an important symbol of freedom. Sarah Gray’s voice did no t come through in the interview, perhaps because of the interviewer, Minnie Ross’s, condescending attitude: â€Å" [it gave] her as much pleasure as a child playing with a favorite toy†. All that Miss Ross seems to have found out is that Sarah Gray thought she was well-treated in slavery. Lewis Evans speaks of his house, and garden lot, his own land on which he raises a garden and chickens. This is important because along with his small pension, it provides his livelihood. Measy Hudson describes working as a laundress, being married and voting twice, all important parts of freedom. I think the slaves’ narratives are accurate when their actual words are faithfully recorded, because they were there, and experienced these events first-hand. ELECTIONS OF 1912 Roosevelt espoused Progressivism, which believed in reducing the power of giant trusts(corporations). Progressivism wanted to remove the influence of special interest groups to form a â€Å"pure democracy† where people had a more direct voice in the central government. He proposed to limit the power of the judicial system by allowing a popular vote or referendum to overturn court decisions. Wilson, a Democrat, espoused antitrust measures and state regulations to control the powers of giant trusts. He also espoused small government. Taft, the incumbent Republican President, espoused the protection of the judicial system from popular votes intended to overturn rulings. He believed that checks and balances were written into the constitution to prevent mass hysteria in governance. Taft believed in protection of the environment and safety standards for mines and railroads, as well as an 8-hour workday, all of which he put in place while president. Eugene V. Debs espoused the organization of workers into unions. He ran on the Socialist Party ticket and was one of the founding members of the International Labor Union. The outcome of the election, with Roosevelt’s victory, says that Americans wanted to have a more direct influence on their national government, and that many of them were in favor of the various reform movements of the time. WORLD WAR 1 PROPAGANDA The U.S. Food Administration sent the message in its propaganda posters to conserve food, especially meat. A poster for navy recruiting week listed the dates to attend. The president lent his image to say conserve food, as well as to say that we must conquer the enemy, and stay united in the war effort. The Armenian and Syrian Relief Campaign’

Nominating a Musician for the Rock and Roll Hall of Fame Essay

Nominating a Musician for the Rock and Roll Hall of Fame - Essay Example ary 20, 1967  Ã¢â‚¬â€œÃ‚  April 5, 1994) an American singer-songwriter, musician and artist of the highest caliber who articulated the angst, anxiety, frustration and untold aspiration of his generation. He was first noticed in the music scene with the anger of "Smells Like Teen Spirit" from its second album  Nevermind  (1991) and departed with the challenge of In Utero (1993). Kurt Cobain belonged to Generation X, the generation who was labeled an X for the utter lack of description that encapsulate that era. This generation however was given a voice, whose language was spoken through the band of Cobain’s Nirvana which was labeled as â€Å"the flagship band† and spokesperson of his generation, the Generation X. The genre of grunge, with its raw deliverance was given an art and emotion by the genius of its spokesperson, Cobain. Kurt Cobain may have suffered the addiction to heroin and committed suicide. But it cannot be denied that his music has a far reaching influence beyond his generation. The genius of his Utero (1993) is a masterpiece that even the generation after him wondered of its genius. He truly lived the life of rock which includes the internal tumult that compels an artist to create. His life, though not openly shared, was communicated through his music not only during his time but also the succeeding generation that followed his. He may have lived short in the music industry, but not short enough to make his

Performer is a man of action. He is not somebody who plays another. He Essay

Performer is a man of action. He is not somebody who plays another. He is a doer, a priest, a warrior... What is Acting - Essay Example The works by Aeschylus, Euripides, Sophocles etc, are the treasures of the classical drama. In different times drama has unfolded several new facets that have brought revolution on the stage. In the Restoration era, drama featured absolutely different characteristics. (Jahn, 2003) It became more vulgar and vigorous, portraying the lecherous and degenerated society. The works of Wycherley, Etherege, Moliere enriched this age with their worthy contributions in drama. However, these were mostly comedies. The revenge tragedies such as Thomas Kyd’s The Spanish Tragedy, the Seneca’s bloodthirsty tragedies and many others of this genre, exhibited a gory and violent trait of stage performances. On the other hand in later period the classical notes are represented again, in the Shakespearean drama (both tragedies and comedies) with a close connection with the modern psychoanalytic traits, such as Macbeth, Hamlet, Othello, Julius Ceaser etc. In the later period, nineteenth centur y ushered a whole new schools of drama with several innovative carves in it. The dramatists like G. B. Shaw, Henrik Ibsen, Brecht etc. came up with excellent notions that metamorphosed the entire figure of world drama. The versatility in the genre of drama has kept the definition of acting or performance moving continuously. Each genre exhibited his or her uniqueness. An actor cannot be captured in a certain frame of definition for a very general reason. He/ she always keeps changing their roles according to the drama. He is essentially a ‘doer’ and hence a performer too. Acting is an art that the performer procreates in each moment of his/ her lifetime by giving life to series of characters, and such a performer who cannot be categorized in any definite role because the art of acting is universal. Dissimilar from the actors in ancient Greece, who were honored, it is supposed that the actors of Rome in the

Iron production in sudan Essay Example | Topics and Well Written Essays - 3000 words

Iron production in sudan - Essay Example Providing a great opportunity for investors. According to a recent KPMG report, the continuing global urbanization is set to drive the demand of steel, effectively doubling it by 2050 and at the current level of demand the iron ore reserves in Brazil’s Minas Gerias and Australia’s Pilbara will generally be exhausted by then. It is predicted that as the world gradually runs out of hematite deposits, there will spring the need for new sources of iron. One of countries that is seen to offer an amazing opportunity for the iron ore industry. Sudan’s full iron ore production potential has never been fully exploited nor has it been completely analyzed but its location next to Congo and the iron ore reserves that are already being mined have shown promising results. By investing in Sudan’s iron ore industry, investors from the GCC stand to reap immense benefits from the virgin iron ore industry in the country Resources In a study conducted by Waldelnour, et al. (2 010), both the Western and Eastern parts of Khartoum have relatively rich iron ore deposits. The type of iron ore deposits that is seen to be available in these areas is generally found in the Mesozoic and especially so in the Upper Cretaceous. This iron ore is generally characterized by having a relatively high tonnage, in addition to its low-grade quality. However it is quite possible that if the country’s investment policy were to be reviewed so as to essentially favor investment in the iron and steel industry, this could have the potential resultant effect of entirely revolutionizing the steel industry in the country especially so in light of the fact that these deposits tend to cover vast expanses of land (Waldelnour, et al., 2010, pg. 2). Sudan’s rich mineral resources: Sudan’s rich mineral that could possibly be exploited by investors includes: According to Mann & Mendenhall, (1964), the Geological Department in Sudan published the Fodikwan Iron Deposits. Sudan’s Fodikwan group of deposits are found to be mainly located at approximately 21?-45’ N. latitude and between 36 ? -45’ E. Longitude this region is found to be in the areas around the north Red Sea Hills areas of the country, at an approximate distance of about nine miles inland from its Port Sudan-Halaiba Road. This is an estimated distance of about 167 miles from the country’s Port Sudan. The nearest harbor that can service any transportation of these iron ore resources is found to be at Marob, which is at a distance of approximately 12 miles from these deposits. It would be necessary for the country to develop a Jetty to support the loading of ships with the processed iron, steel or iron ore that has been mined from this region. The report also indicated that the iron deposits in the country can essentially be divided into the two categories of solid ore which is seen to constitute about 147,000 metric tons of relatively accessible ore containing about 60%Fe, while the mixed ore deposits were estimated to stand at 95,000 tons with an

In Dickinsons poetry Essay Example for Free

In Dickinsons poetry Essay The poem A bird came down the walk shows how man and nature are interlinked and are unable to escape this permanent connection even though they may sometimes clash and not connect. Lines such as then hopped sidewise to the wall show the curtsy and human like behaviour of nature and how nature is inevitably given human qualities. In this poem we are shown the brutal and civilised side of nature, we see that nature is beautiful from a distance however as you get closer and see nature in depth you see the brutality of nature, however even after seeing and showing us the brutality Dickinson still continues to admire nature as something beautiful. Her poem also shows how nature is very free and careless since nature doe not worry about anything, it is also shown to be unforgiving. Themes of nature are also present in I heard a fly buzz and because I could not stop for death Dickinson shows transcendentalist views in many of her poems. Dickinson shows the clash of mankind by saying he bit an angleworm in halves this quote shows how nature can be threatening to mankind since an angleworm is used as bait when fishing and since the bird is eating them it shows that it is disturbing mankinds techniques of survival. The word bit implies human characteristics and highlights a connection between mankind and nature, the word bit is associated with eating which shows the inescapable interlink of man and nature. The word angleworm is capitalised showing its significance which highlights the birds unthoughtful act. This stanza has a ABCB rhyme scheme which sets the a motion in the stanza. Themes of nature are also highlighted in poem 712 by the lines Gazing Grain the word Gazing gives nature human characteristics and the capital letter G makes nature seem like something important and off great value and this again links to human quality since a persons name is always began with a capital letter. Natures brutality is highlighted in the following line where it says And ate the fellow raw this line is quite powerful as it shows that the bird is carefree and is unforgiving, this line shows the freedom in nature since the bird does not hesitate and simply does what it wills. The word And at the beginning of the sentence is capitalised to show the significance of the birds act also it may show the speakers dismay or shock at the innocent looking birds act. This line is quite strong as the word raw stands out this is associated to something dangerous however it can also be seen as fragile since you may interpret it to be something naked. The word raw shows the brutality of nature and that nature has a good and bad side just like mankind who may be evil or good again linking nature to mankind almost like a inescapable cycle. This disturbance is also highlighted in the poem I heard a fly buzz where Dickinson mentions stillness in one line and in the following line she says heaves of storm these lines show the contradictory behaviour of nature it also highlights how quickly nature can change its path from something peaceful and beautiful to something brutal and disturbing, which is linked to mankind since mankind also changes paths very easily from good to evil or vice versa showing the link between mankind and nature. The word stillness associates to death or peace which shows the calm and relaxed side of nature and how it can be in favour to mankind, however the word storm associates to destruction or disaster which represents its brutality and how it can be harmful to mankind. Dickinson also highlights how mankind can disturb nature in their natural performance in the line He stirred his Velvet Head this shows the bird being disturbed as he has now became cautious someone is around him or is watching him this may also reflect that he may feel his privacy is being invaded which again gives the bird human qualities. The word Velvet Head shows connotations of something regal and royal and also highlights a feminine side to the bird, this shows the connection of mankind and nature since the bird is well groomed and words such as velvet may represent some type of clothing which suggest the bird is dressed giving him human quality and characteristics showing the link between nature and mankind. The word Velvet also highlights sexual connotations as you interpret it to be something quite sexy or soft and feminine, further down in the poem the word seam is used also showing something sexual as a seam is usually referred to in context to clothes. The capitalisation of the Velvet Head again gives the bird importance and shows a status for him. In stanza three Dickinson uses words such as rapid, hurried and frightened this shows a change in pace in the poem as the poem was running fairly smoothly and then these words create tension and make the tone more panicked this shows the human like nature of the bird since he is given human characteristics and shows that the bird is frightened of the speaker. The theme of disturbance is shown in the poem I heard a fly buzz since throughout the poem we are being shown how nature is disturbing the death of the speaker, the speaker says there interposed a fly- which shows the disturbance the fly is causing to mankind since the speakers death is being interrupted. The word interposed associates to annoyance or distraction showing that the fly is ever present and it is not prepared to leave showing the presence of nature around mankind all the time and vice versa. The dash at the end of this line suggests that the sentence is unfinished and is maybe going to carry on, also shows the speakers attitude as maybe annoyed and not pleased. Dickinson highlights the arrogance of the bird showing the line And he unrolled his feathers this is representative of the birds ignorance to what its done, it shows that the bird has naturally carried out a act of killing and simply flown away, this line may also be interpreted as the bird having to move on in his life and how the bird has no set place and is on a constant journey. The word unrolled highlights a sort of arrogance in the birds body language, since the word unrolled is quite soft and nai ve suggesting he does not understand the significance of his actions and doesnt realise his mistake, this shows the clash between man and nature since Dickinson is suggesting here that the bird has no morals and this is a natural act for him, whereas mankind would be very cautious and careful of their actions and would most of the time realise there mistake. In this line there is no significant punctuation used. The poem highlights her attempt to get to nature and get to understand nature however the bird does not let her. Dickinson may represent nature as god or something more powerful then mankind and she may be implying that she is trying to understand god or this force however it is so powerful that she is failing. Themes of god being represented in nature are also hinted in poem 465 in which Dickinson says And then the windows failed this line implies that the barrier which was interfering in Dickinson death has failed. In this poem the fly may be interpreted as Satan as it is disturbing a command given by god, puritan values are also shown here as the fly fails to interrupt and death is successful showing that god holds the power. This shows how nature and mankind are interlinked since they can not escape each others realms. Overall Dickinson repeatedly shows the connection between mankind and nature as inescapable, she repeatedly shows how powerful nature is and how nature and mankind effect each other; Like one in danger, cautious, this shows the reader that Dickinson values nature and gives nature the same respect as she would to mankind we know this since Dickinson constantly gives nature human values and qualities. Dickinson clearly highlights her importance for nature by linking it to god and linking it to mankind, showing her transcendentalist views.

Orwells Animal Farm Genre Untangled English Literature Essay

Orwells Animal Farm Genre Untangled English Literature Essay Out of George Orwells repertoire many of his works can be described as somewhat ambiguous in terms of genre. For instance, Down and Out in Paris and London is a recount of his personal experiences flavoured with fictional elements, a semi-autobiography, but it is written in the objective voice of a report, article or documentary with additional sociographic speculations. Many of his essays linger on the boundaries of the short story, as well. Animal Farm is no exception of this Orwellian tendency to fuse different genres. It is often labelled as a dystopian allegorical novella or satire, but has been called a fable in the Aesopian tradition as well. In the present paper I will analyse Orwells work from the viewpoint of all these genres separately keeping in mind of course, that the genres themselves overlap each other in some characteristics and examine how Animal Farm functions as a dystopia, a satire and a fable. While Animal Farm fits some of these characteristics it also lacks in others. It certainly portrays oppression in the form of a totalitarian centralized power, however, in contrast with some well known works strongly associated with the genre including Orwells Nineteen Eighty-Four as well it describes the process of how the utopian dream develops into the dystopian nightmare. Considering displacement it is not really in line with the dystopian trait either. It is for certain that the story takes place somewhere in the English countryside, we are even given the name of Willingdon and The Red Lion, an existing village and pub in East Sussex. Otherwise there is no special importance in the geographical location of the Farm, suggesting that it is not important where it takes place, and consequently, that it could happen anywhere. As for temporal coordinates they are even less specified or notable; the story is not tied to, and thus not untied from any particular date or era. The story could have taken place yesterday just as well as a hundred years ago or in the distant future; it is not dissociated or displaced from either Orwells or todays readers time. (Of course depending on the interpretation of the story, it does allude to the Stalinist regime and the Russian revolution but only externally as its mere allegory not internally to the novellas fictional universe.) However, it could be argued that there is some kind of displacement, not in spatial or temporal terms but in the very nature of the story as a fantastic beast fable or fairy story as Orwell called it. Its characters of talking animals who read and write and manage a farm on their own is surely not a picture of our everyday life. The feature Animal Farm most clearly adopts from the dystopian genre is the intention of warning. It warns of the danger of communist dictatorship and raises the attention as well of the existing conditions present at the time in the Soviet Union; or in a more general interpr etation the corrupting effect of power when exercised by anybody  [1]  . However, the element of warning or at least criticism of human vices or follies with the intention of improvement  [2]  is also representative of the satire. Although it is usually meant to be funny, its purpose is not just humor for its own sake but an attack on something the satirist strongly disapproves of and to persuade the reader (or viewer depending on the medium) to strive for a solution to the problem presented, using the weapon of wit, irony, and caricature.  [3]   In Animal Farm the satirical irony emerges from Orwells style of narration and his use of the animal allegory. The narrative style he employs is characterized by simple language and light, objective even impersonal voice with the limited point of view of the enslaved animals. The plain language on the one hand is to reflect the naÃÆ' ¯ve perception of the animals  [4]  , on the other this terse phrasing is set in ironic juxtaposition[to] the crassly elitist, manipulative, unintelligible, and circumlocutory discourse of the pigs, through which the fictitious passes off as factitious.  [5]  Samir Elbarbary in his essay Language as Theme in Animal Farm even argues that the conscious derangement of language, and linguistic superiority which sustain the assumption of power, is one of the novellas fundamental thematic concerns. Language and how language can influence or even determine the way people think is often a recurring theme in Orwells works, for example the idea of Newsp eak in Nineteen Eighty-Four, and he even addresses the problem directly in essays, such as Politics And The English Language, in which he attests for simple uncomplicated language in scholarly and especially in political contexts. According to Elbarbary, in Animal Farm the revolution is, in a sense a language-focused enterprise, a product of specifically aggressive linguistic energy, and language  [6]  , which can efficiently control reality, is the source of the tragic outcome rather than its mere reflection. Those animals who have an underdeveloped language, are compleatly overpowered by the linguistic skill of the pigs; their ensnarement is less a matter substance than of generic linguistic impotence and deficient semantic memory.  [7]   Even thought the point of view of the narrator is limited (or at least it is more distant from the feelings or thoughts of the pigs than that of the other animals), the narration still implies more to the reader than the animals themselves are aware of. We understand the difference between the truth of a situation and what the characters know about it, while the characters remain ignorant of the discrepancy, which creates dramatic irony. For example when Squealer explains that the van in which Boxer was taken to the hospital formerly belonged to a horse slaughterer and that the veterinarian who now uses it did not have the time to paint over the horse slaughterers sign on its side, the narrator says: The animals were enormously relieved to hear this.  [8]  The reader however, can assume the truth right when the van appeared to carry the horse away. Another level of satire is in the characterization. Orwell attributes easily recognisable human traits to animals, which remain absolute, that is they are character types rather than fully developed characters, without the ability to grow or change, the animals shall stay both animal and human. It removes the possibility of very complex characterization.  [9]  In the light of the parallel that can be drawn between the story and the Russian revolution, some characters are clear caricatures of exact historical figures (like Napoleon-Stalin, Snowball-Lenin) others of specific social groups or classes or even tools used to uphold dictatorship (e.g. Boxer-working class, Squealer-propaganda), creating a grotesque mirror image not just of the events but the figures involved in it, enhancing the validity of the satirical parallel. The third genre considered here is the already mentioned beast fable. It is usually a brief tale that conveys a moral lesson, usually by giving human speech and manners to animals. It is a very old form of story related to folklore and proverbs, the fables in Europe descends from tales attributed to Aesop, a Greek slave in the 6th century BCE. The French fabulist La Fontaine revived the form in the 17th century with his witty verse adaptations of Greek fables.  [10]  The form can be associated with the satire as well as the beast fable is also used as a culturally universal satirical technique. It is basically the dramatic realization of a metaphor and satirists have always found this translation of metaphor to dramatic fact an extremely effective way of portraying the true nature of vice and folly. As far as characters, style and language (its simplicity thus serving double causes) Animal Farm fits the criteria of the genre. According to Christopher Hollis the writer of the beast fable must throughout be successful in preserving a delicate and whimsical balance due to the overall absurdity of animals behaving and talking like humans and discussing complicated intellectual problems. He argues that Orwell is able to maintain this balance by avoiding any unnecessary explanation of the fantastic elements of the story in an otherwise realistic setting.  [11]   However if we take into account its length it is considerably longer than the traditional fable. In addition, some point out that its moral lesson is questionable or nonexistent as it is impossible to attach a moral to any familiar sense to Animal Farm, where wickedness ends in triumph and virtue is utterly crushed.  [12]  I do agree that there is no lesson to be learned in the fashion of for example The Tortoise and the Hare, however I believe that there are moral undertones embedded in the overall message of the novella, like power corrupts; it is a moral lesson without answers, or a moral tragedy of humankind. In conclusion, Orwells Animal Farm seems to function best as a satire but he consciously incorporated techniques and elements of other literary forms, most elaborately of the beast fable, to use it as his satirical vehicle. As for the dystopia genre it seems to be a little farfetched to attach the term to Orwells novella, it is more like a loud hee-haw at all who yearn for Utopia.  [13]  

Gay and Lesbian Visibility in Movies and Television :: essays research papers fc

The 1990s saw surge of gay characters in both television and movies. From Ellen Degeneres and her character Ellen Morgan coming out under much scrutiny on the TV show ‘Ellen,’ to Julia Roberts and Rupert Everett comedically playing off each other in the motion picture ‘My Best Friend’s Wedding.’ Sure, gays and lesbians have been around forever, especially in Hollywood. But never has there been a time to be more out. With the popularity of shows like Will and Grace, which feature leading gay characters, as well as Dawson’s Creek and it’s supporting character of teenager Jack McPhee, we are slowly seeing gay and lesbian characters creeping into the mainstream media.   Ã‚  Ã‚  Ã‚  Ã‚  The family unit has always been a treasured and revered dynamic on television and in movies. Dating all the way back to I Love Lucy, storylines focused on the relationship between man and woman. Ozzie and Harriet introduced us to the quintessential American family—father in a suit, mother in pearls, and two exceptional children. It wasn’t until the 1970s that gay characters and lifestyles began to emerge. In 1973, An American Family, a PBS series featured one of the family’s sons revealing his homosexuality. In 1977, the television show Soap costarred Billy Crystal as an openly gay man. In the 1980s, it became trendy to feature gay and lesbian characters in ensemble casts. If you watch reruns, you can always find the token gay, that is, the really flaming homo or the butch lesbian gym teacher. The motion picture Mannequin, starring Andrew McCarthy and Kim Catrall, featured Meshach Taylor as Hollywood, an eccentric, finger-snapping homosexual. Many stereotypes such as these continued until the early nineties.   Ã‚  Ã‚  Ã‚  Ã‚  In 1991, on LA Law, two women share the first same sex kiss on prime time television. A few years later, NBC’s hit show FRIENDS featured Ross Gellar’s ex wife as a lesbian, raining a child with her female partner. At the same time, the FOX network censored a gay same sex kiss on Melrose Place, a show known for pushing limits. Around the same time, censors and right wing groups were up in arms over a kiss shared by Roseanne and Mariel Hemmingway. In the end, that kiss was also censored. But things were slowly evolving in the movies. Independent films had been featuring gays and lesbians as main characters, depicting real life and real relationships. Armistead Maupin’s Tales of The City revolved around a homo-hetero pairing.

Comparing Company Website Design :: Internet

Microsoft I have been to this site fairly recently, and it has been updated since then. It is pretty colorful, and is easy to navigate. All of the different Products and Downloads are listed on the sidebar of the page. This reflects the company well, because they are a computer company, so I would hope that their website would be the best that I went to. And it was. There was a lot on the website but it was very organized. At the bottom there is a link to contact them, and even a link for Journalists. This page had a lot of product news and consumer news. This was a great site. World Health Organization The WHO website could have been a little more organized, but it was fairly easy to navigate. The picture on the home page made you very sympathetic to the cause. It also made you want to learn more. There were links for 6 different languages, and that was easy to find. There was also a search tool at the bottom just in case something was hard to find. It was hard to find a Contact Us link. I liked that the home page had news releases and other featured sites involving World health. Intel The Intel site was very animated and 3-D looking. While it wasn’t as organized as Microsoft, it was still easy to navigate. It had resources for businesses and personal separate, and also news was readily available. The also had a Site Map link at the bottom, which was very organized, just not as colorful. There was a lot of advertising on their home page, which was a great idea. There is a Contact Us and Press Room link at the very top of the page, which is great for consumers and journalists. Apple The Apple/Mac website was a little cluttered, but still easy to look around. They have very colorful â€Å"hip† looking pages, that appeal to younger people. You had to log in for some stuff, but most things were accessible. It was hard to find a Contact Us, or Journalist link. They focused a lot on the store and selling accessories and iPods. (I can imagine this is more during the Christmas season) This website is updated a lot, because I visit it frequently. It looks like a lot of effort is put into this site, and it is very aesthetically pleasing. Dell Dell went a step further in separating information .

National Student Speech Language Hearing Association :: Personal Narrative Writing

National Student Speech Language Hearing Association Even though I have only been in college for one semester I feel like I have done something very significant. I have met a person with a disorder, but they are unaware that they have this disorder. This person is a child and he can not speak. I have also experienced a feeling I have never had before. As a speech pathology major, I decided to join a club geared towards speech production and I knew I wanted to work with children. As I was climbing the stairs to my phonetics class, I saw a flyer for N.S.S.L.H.A. (National Student Speech Language Hearing Association). The flyer stated that the organization was only for people who were majoring in Communication and Science Disorders. But it said nothing about what the club did. Out of curiosity, I went to the first meeting on September 18th. I found out that the people in the organization help children and sometimes elderly people with speech problems. The first activity I did with N.S.S.L.H.A. was attending a book reading at Barnes and Noble. I was the first reader of the year and I was so excited because I love to do activities with children. I read If You Give a Mouse a Cookie to 15 children and their parents. I was actually also nervous because I wanted to do a good job. When I saw the kids that had come to hear me read I became so nervous that I made mistakes reading a children’s book. Even though this was a big deal to me, I had no idea of what was to come. I found out that the following weekend was a Flagstaff Family Day. This day was dedicated towards early intervention awareness. So when I arrived there I saw that most of the children were impaired somehow. Some of the children couldn’t pronounce certain letters, but there was one little boy named Jason who couldn’t talk at all. I decided to spend time with him because I had never spent time with a child like him before. Jason is about three years old and I was amazed by him. Since he is so young he doesn’t quite know that he has a speech disorder. I was making crafts with him; stuff like paper tambourines and masks.

Musical Genre Classification of Audio Signals Essay

Musical genres are categorized by human. It depends on human hearing. There are common characteristics shared by categories. These characteristics are related to instrumentation, rhythmic structure, and harmonic content of the music. Currently many music is still classified by manually. Automated system for musical genre classification can assist or replace manual work for classifying musical genre. In this paper, the automatic classification of audio signals into hierarchy of musical genres is explored. Three feature sets for representing timbral texture, rhythmic content and pitch content are proposed. Also propose classification through two-times KNN classification method and show enhancement of accuracy. Using two-time KNN classification method increases accuracy about 5% than one-time –++++KNN classification which two-time KNN classification accuracy is 77.9% and one-time KNN classification accuracy is 73.3%. Index Terms – Music classification, feature extraction, wavelets, KNN classification Table of Contents I. II. Introduction Music Modeling & Genre Segmentation III. Feature Extraction A. Timbral Texture Features i. ii. iii. iv. B. Spectral shape features Mel-frequency cepstral coefficients (MFCCs) Texture window Low-Energy features Rhythmic Features C. Pitch Content Features IV. Classification V. Evaluation and Discussion VI. References I. Introduction Musical genres are categorized by human. It depends on human hearing. There are common characteristics shared by categories. These characteristics are related to instrumentation, rhythmic structure, and harmonic content of the music. Genre classification is magnified when music industry moved from CD to web. In web music is distributed in large amount so importance of genre classification is magnified. Currently many music is still classified by manually. Automated system for musical genre classification can assist or replace manual work for classifying musical genre. In era of web, it enabled to access large amount of all kinds of data such as music, movies, news and so on. Music database has been grown exponentially since first perceptual coders early in the 90’s. As database grows it demanded tools that can enable search, retrieve and handle large amount of data. Classifying musical genre was great tool for searching, retrieving and handling large music data base [1-3]. There are several more method such as music emotion classification [4], beat tracking [5], preference recommendation [6], and etc.. Musical genres classification (MGC) are created and used for categorized and describe music. Musical genre has no precise definitions or boundaries because it is categorized by human hearing. Musical genres classification are highly related to public marketing, historical and cultural factors. Different countries and organizations have different genre lists, and they even define the same genre with different definitions. So it is hard to define certain genres precisely. There is not an official specification of music genre until now. There are about 500 to 800 genres in music [7, 8]. Some researchers suggested the definition of musical genres classification [9]. After several attempt to define musical genres researchers figured out that it shares certain characteristics such as instrumentation, rhythmic structure, and pitch content. Genre hierarchies were created by human experts and they are currently used to classify music in the web. Auto MGC can provide automating classifying process and provide important component for complete music information. The most significant proposal to specifically deal with this task was released in 2002 [3]. S everal strategies dealing with related problems have been proposed in research areas. In this paper, automatic musical genre classification is proposed showed in Figure 1. For feature extraction, three sets of features for representing instrumentation (timberal), rhythmic content and pitch content are proposed. Figure 1 Automatic Musical Genre Classification II. Music Modeling & Genre Segmentation An untrained and non-expert person can detect the genre of a song with accuracy of 72% by hearing three-second segmentation of the song [11]. However computer is not design like human brain so it can’t process MGC like human. Despite whole song may somehow influence the representativeness of feature, using whole song can extract most of features that music has. Also to extract short segment of music for automation system is unsuited for the purpose because difficulty of finding exact time of music that represents genre of music. Without research finding certain section of music representing its characteristic using whole song to modeling is proper way to MGC. There are too many music genres used in web [7, 8]. Classification genre has to be simplified and in this paper proposed genres which are popular used in MP3 players in the market. Figure 2 Taxonomy of Music Genre III. Feature Extraction Feature extraction is the process of computing numerical representation that can be used to characterize segment of audio and classify its genre. Digital music file contains data sampled from analog audio signal. It has huge data size compared to its actual information. Features are thus extracted from audio signal to obtain more meaningful information and reduce the over-loading processing. For feature extraction three sets of features for representing instrumentation (timberal), rhythmic content and pitch content will be used [3]. 1. Timbral Texture Features The features used to represent timbre texture are based on the features proposed in  speech recognition. The following specific features are usually used to represent timbre texture. â‘   Spectral shape features [1-3] Spectral shape features are computed directly from the power spectrum of an audio signal frame, describing the shape and characteristics of the power spectrum. The calculated features are based on the short time Fourier transform (STFT) and are calculated for every short-time frame of sound. There are several ways to extract feature with spectral shape feature. 1. Spectral centroid is centroid of the magnitude spectrum of STFT and its measure of spectral brightness.

Philippine Economy

A recap of how previous Philippine republics and administrations handled the country's economy since the Spanish era, including their management of the economy. In the days wherein the Philippines was under the Spanish Republic the country was at a good spot in Asia. Manila and Cebu were the only European cities; we were one of the best countries in Asia when it comes to trading domestically and internationally. Before, we were always trading with mexico sharing our culture to them and them sharing there culture to us.The country was at a good spot but as the Americans said the Philippines was like any other good but slow spanish colonized economy like the economies of countries in South America namely Mexico, Puerto Rico, Argentina and etc. According to an article â€Å"Economy during the Spanish Colonial Period. † n. page. Web. Aug. 2012. . After being controlled under the Spanish regime which lasted for 300 years, the Philippines were in a new republic under the American go vernment. Our country once became a part of America.It was one of the American States just like Hawaii right now, no matter how far they are, they still belong to the United States. Our country's economy before was really pump-priming. It was rising back again because Americans knew a lot in controlling a country's economy. They knew how to make people more productive in each of their daily lives, they knew the importance of the english language to us and they knew how to make this country moving from a good Latin country to a bustling busy city.Americans taught Filipinos how to use the telephone that's why now, as you can see, we have PLDT, We were taught how to speak english that's why now, as you can see, we are now Asia's most competitive english speakers. We were taught how to use the television, how to function the air conditioner, how to operate the washing machine and etc. We were so Americanized before that in the whole Asia we were the first Asians to taste coke and that's why now, as you can see, coke has been a part of the filipino tradition like having coke and bread to your visitors – a way of showing Philippine Hospitality.Our country had a lot of investments coming from America and they built a lot of places that could've been a major city if they were to stay here longer like Makati, Subic, Taft, Commonwealth and Clark. Without the Americans we wouldn't have these right now. We should be grateful to them because now that the Philippines is growing, more call centers, condominiums, office spaces, retail , and commercial areas are sprouting in the place. According to an article â€Å"The Philippines: Changes in the American Period . † n. page. Web. . While Philippines was at peace with the Americans there came the Japanese soldiers.They controlled our country like any other country they controlled in other parts of Asia like Malaysia Singapore, Cambodia, Vietnam, Hong Kong and Korea, they stole many natural resources like gold, cop per and many other metals that would help they're country – Japan to get rich and have a good economic status. In the Japanese Era our country – The Philippines, experienced on of the worlds worst inflations. In that time everyone was struggling, striving to get a good life and exerting so much effort just to escape the poor situation.In the Japanese era, The Philippines became poor. According to Balabag, Marilyn. â€Å"The Japanese Period in the Philippines. † n. page. Web. Aug. 2012. . While the Japanese people were busy harassing Filipino women, Americans fought back for us because they knew we had enough of it and we deserve peace. Surprising the Japanese, the Japanese men were preparing in case the situation will get real serious like secretly planning the attacks, secretly creating and formulating bombs, secretly building aero weapons and aquatic weapons as well.The Americans started it so both countries Japan and The United Stated of America began exchang ing bombs from place to place destroying each other's lands and properties and killing each other mercilessly. And finally Japan declared quits. The Philippine economy was at its worst. We couldn't grab time to recover our country's economy, our precious structures were being affected with all the bombs and missiles that soldiers threw on causing a lot of damage and money to recover it.Japanese people even stole billions from us and never even bothered to pay they're debts until now and to top it off they even stole gold from us like the huge beautiful golden statue called â€Å"Yamashita† †¦What a shame†¦ and to think its one of the richest countries in Asia to date. According to Jess Chin, Carlos Gavino. â€Å"The Philippines-American/Japanese War. † n. page. Web. Aug. 2012. . After being under the Spanish, American, and Japanese republic, The Philippines finally declared independence.Philippines finally stood up on its own two feet. Former President, Glori a Macapagal Arroyo's Administration, The Philippine Economy was lagging. A proof would be the GDP Growth where it grew for only a tiny 1%. If you would compare Philippines to other South-East Nations, The Philippines was behind amongst them. Even Vietnam chased after The Philippines and almost Cambodia thank God Cambodia has not been able to chase us yet because if we're chased it just goes to show The Philippines is really Sick and not investor friendly.We were down by then in her administration. According to Africa, Sonny. â€Å"Dark Legacies: The Economy under Gloria Macapagal-Arroyo. † (2010): n. page. Web. Aug. 2012. . In The Present administration of President Noynoy Aquino, The Philippines is showing shocking results for example the GDP Growth. The 2010 GDP Growth in The Philippines early months were really high from 6% to 7% and to 8%. We were really in a good spot.Reasons why the GDP grew that way was because of election spending and if you're not familiar with elect ion spending, it means that politicians spending so much money for ads and commercial for them for example Manny Villar, and by the way I chose Manny Villar because in my own opinion, I think Manny Villar had the most ads and commercial in the elections season like the famous song that was produced and composed for him only few knew the title we mostly called it â€Å"Nakaligo ka na ba sa dagat ng basura† so back to the topic, election spending is simply politicians putting they're whole money on the commercials and ads which would equal to opening doors for new jobs like the employees of the printing press getting more productive, people will get jobs for pasting they're posters, directors, writers and producers gets more productive and more people will be paid for talent fee. Well, those are the most common jobs when there is election spending there are still actually more jobs that are uncommon, more jobs that can help Filipinos sustain they're daily needs. According to Ed u Lopez, Chino Leyco. â€Å"GDP up by 7. 3% in 2012. † (2011): n. page. Web. Aug. 2012. , Remo, Michelle. â€Å"Election Spending to boost GDP. † (2009): n. page. Web. Aug. 2012. . As of now the Philippine GDP growth of 2012 in the 1st quarter is 6. 4%. Shocking everyone around the world for getting the second highest rank in asia only behind China.China is ranked as the highest because of the endless construction of condominiums which until now†¦stayed empty†¦ By the later years China will experience a huge property bubble burst which means when all condominiums are built and still stayed empty, what would happen is that, businessmen will go bankrupt and money will not be circulating anymore because why would China still build many condominiums when most of the condominiums are not even sold yet? Which would mean less construction equal to less people will be employed, equal to fewer people will get salary which would, in the end, equal to money not circulat ing around the country which would result to low GDP Growth even now, predictions for China's 2nd Quarter GDP Growth are smaller than there 1st Quarter GDP Growth of 8%. This is one of China's big problems, they keep on building infrastructures which in the end, it won't even be utilized. According to an article â€Å"Phl GDP up 6. 4% in Q1, highest growth in ASEAN. † (2012): n. page. Web. Aug. 2012. , Rapoza, Kenneth. China's Housing Bubble Past, And Its Future. † (2011): n. page. Web. Aug. 2012. . The Philippines, as of now, is doing really good, our country has been really doing good that the media said that sooner, the Philippines will get an credit rating upgrade and an investment grade. If you're not familiar with credit rating upgrade and investment grade, these are somewhat like badges for countries interpreting how investor-friendly we are. If we get an investment upgrade than we will get noticed by investors easily and would mean the more investments this coun try will receive. To make it easier its like pasting more hashtags on an instagram photo.The more hash tags, the more people can easily find it and will be able to like it and the more exposure your photo will get. Now back to the topic, Our country, The Philippines has been getting so much news from Moody, Fitch and etc. that sooner or in the near future the Philippines will be getting an investment grade and a credit upgrade rating. Which would also cite a proof that The Philippine Economy is really doing good. According to PH credit rating. † (2012): n. page. Web. Aug. 2012. , Malinao, Alito. â€Å"S;P upgrade makes PH bullish about economy. † (2012): n. page. Web. Aug. 2012. , Raquel, Nick. â€Å"PHL economy shows signs of credit boom, says Fitch. † (2012): n. page. Web. Aug. 2012.The Philippines shocked the whole world when it became a creditor to the International Monetary Fund (IMF) handing help to the other countries by donating dollars to the weakening c ountries like Greece. When The Philippines donated billions to IMF it made The Philippines more visible to everyone making businessmen think of the Philippines as a possible destination for putting up they're future planned investments. It proved to the rest of the world that The Philippines is now a decent country, its now having a fresh start, its now making its name again and its now making a new reputation. A reputation that will forever change the mindsets of people around the world thinking that the Philippines is a Sick Laggard Man of Asia to A Rare Bright Spot of Asia.According to an article â€Å"PH NOW AN IMF CREDITOR / IMF LOAN TO HELP STABILIZE WORLD ECONOMY. † (2012): n. page. Web. Aug. 2012. . In the future we'll be expecting more good things to come because as of now, we have a lot of positive outlooks beginning with the Filipinos' capacity to speak english like no other non-english speaking countries in the world. Our Business Process Outsourcing (BPO) Industr y is currently rising with so much buildings under construction for the new office spaces for call center companies expanding they're company and for first timer call center companies finally entering the Philippines. A survey even showed that the Philippines still lacks office spaces.Which just goes to show that we will be expecting different skylines in the future especially with Manila, Clark, Cebu and Davao that would show the country's richness and status just like what they say, â€Å"You can simply estimate the country's economic performance through its skyline† Which is true as you've notice big cities like New York, Tokyo, London, and Singapore they're skylines are beautiful and it really compliments they're long term economic status. According to Dela Pena, Zennia. † Eton ramps up construction of new BPO buildings . † (2011): n. page. Web. Aug. 2012. , Dela Pena, Zennia. â€Å"SMDC mulls development of BPO buildings . † (2012): n. page. Web. Aug. 2012. , Dela Pena, Zennia. â€Å"Filinvest Land ramps up new BPO buildings . † (2011): n. page. Web. Aug. 2012. . The Filipinos' capacity to speak english so fluently led many foreigners from around the world to study here and learn how to speak english like how Americans speak the language. Most of the foreigners that come to The Philippines to study here are Koreans.Koreans decide to study here rather than in The United States because education here is cheaper and much worthy plus if you talk about the plane ride and the ticket price, its way cheaper and hours of traveling is also shorter so its less hassle. Be it French, Italian, Kenyan, Thai, Vietnamese , Iranian, Indian and so much more to mention they're purpose here is to study english for we Filipinos are good at it and they believe that too that Filipinos are really talented at it. But you would ask where will all of these expats stay for the time that they will be studying in this country? Well condominiums, houses, apartments are the answer. Lately, The Philippines' real-estate market has been rising and one of the reason are the foreigners coming here to study english.Real-estate in the Philippines is truly booming and when its booming that would mean the construction industry will also grow at a faster and plus not to mention the infrastructure projects and PPPs of the government. According to an article of â€Å"Why foreigners study English in the Philippines. † (2006): n. page. Web. Aug. 2012. , â€Å"About 200,000 South Koreans study English in RP, says envoy . † (2008): n. page. Web. Aug. 2012, Cecil, Morella. â€Å"Property boom transforming Philippine skylines. † (2012): n. page. Web. Aug. 2012. . The Philippines is truly blessed with Filipino people who are so eager to work that they would leave they're family and love ones just for the sake of earning money in order for they're children and love ones to sustain they're daily needs.Thanks to the Overseas Filipino Workers (OFW) The Philippines has been receiving money or shall we say remittances from them. Remittances are a plus for the country because its like receiving money from other countries and would equal to adding up the circulation of money in the country from a base of billions, it would turn to trillions thanks to remittances that OFWs worked hard for. With remittances, retail industry in the country will grow which means sufficient salary for employees in shops and around and again it circulates which means economic performance will improve. According to Remo, Michelle. â€Å"Overseas Filipino remittances up by 5% to P10 B in 1st half. † (2012): n. page. Web. Aug. 2012.

Fahrenheit 451 by Ray Bradbury Essay

â€Å"There are worse crimes than burning books. One of them is not reading them† -Ray Bradbury. In the past there were events that affected book writers. People will get together to burn books because they thought it was inappropriate or they were against their literature. Montag is a fireman in a futuristic society who would start fires instead of put them out. After he meets Clarisse a young girl different from all teenagers in that society Montag will find himself doing things he never did before. In Fahrenheit 451 Montag will have a huge change in his life that will make him different from other people. There were people who contributed to that change, people who Montag would never thought of meeting or people he had already knew. Clarisse had Montag analyzing his happiness and questioning himself which caused him to do things he never done before. When Montag and Clarisse were walking Clarisse asked him if he was happy with the life he was living. â€Å"Of course I†™m happy. What does she think? I’m not?†. Montag seems really bothered by the question Clarisse asked him. Montag is positive about his happiness, he knows he’s happy with the life he’s living He knows he’s â€Å"happy† but by someone else asking him that kind of question it doesn’t seem like he is. â€Å"He wore his happiness like a mask and the girl had run across the lawn with the mask and there was no way of going to knock on her door and ask for it†. Once Clarisse asked him about his happiness he started thinking about it and he knew he wasn’t happy at all. He thinks that Clarisse opened his eyes about it. Montag also feels like Clarisse was the one who took his happiness by asking him that question. Mildred proved to Montag he wasn’t really by the way she acts towards him. She was the one who woke him up and made him do something so he could have his happiness back. Mildred as a wife should listen to Montag and make him feel better. Instead Mildred would totally ignore him and seem careless every time he would say something. â €Å"†I’m hungry† â€Å"Last night† he began. â€Å"Didn’t sleep well. Feel terrible† she said. â€Å"God I’m hungry I can’t figure it† â€Å"Last night† he said again. She watched his lips casually. â€Å"What about last night† â€Å"Don’t you remember†Ã¢â‚¬ . Mildred doesn’t really listens to Montag He always tries to tell her something but she seems careless about it. He feels like he’s not getting the attention he wants from her. â€Å"â€Å"When did we meet? Where?†Ã¢â‚¬ ¦ â€Å"It doesn’t matter.† She was up, in the bathroom now, and he heard the water running, and the swallowing sound she made. â€Å"No, I guess not,† he said. This demonstrates that all this years of marriage meant nothing to Mildred. By her not remembering how they meet tells that Mildred doesn’t really care about their marriage. Faber encouraged Montag to overcome his fears not by giving him advice but by showing Montag he also feared. Faber was always the type to follow the rules so he wouldn’t get in trouble and face the consequences. Montag didn’t want to be a coward like Faber that’s how he overcame his fears. â€Å"For a little while I’m not afraid. Maybe it’s because I’m doing the right thing at last. Maybe because I’ve done trash thing and don’t want to look the coward to you†. Faber has never made a change in his life because he has always been afraid of the consequences. He tells Montag that he has to face his fears which make him feel like he’s doing the right thing for once. â€Å"â€Å"Mr. Montag you’re looking at a coward. I saw the way things were going a long time back. I said nothing. I’m one of the innocents who could have spoken up and put when no one would listen to the ‘guilty’†¦Ã¢â‚¬  Faber is telling Montag that he never had the courage to stand up in what he strongly believes its right. He categories himself as a person who’s afraid by the consequences. In Fahrenheit 451 by Ray Bradbury, Clarisse, Mildred and Faber had Montag doing things he never did before. They had him questioning, making him realize and encouraging him to get over his fears. He was doing things he never saw himself doing before in his life. Even though those things he do had its bad consequences he never felt that good about himself. Many people won’t confront their fears because they’re scared of the consequences but once people they overcome those fears there will be nobody who will stop them to do what they think it’s right. WORK CITED Bradbury, Ray. Fahrenheit 451. Simon and Shuster paperbacks; New York, 2012

Supply Cahin Management of Alauddin Textile Mills (Pvt.) Limited

Chapter One: Introduction 1. 1: Introduction Bangladesh is rich in natural resources as well as human resources. There are many garments and textiles in this country for the availability of manpower. Favorable environment for work and co-operation of government also encourage establishing garments and textile industries here. Alauddin Textile Mills (ATM) Pvt. Limited is one of the well-known textile mills in Bangladesh. In this paper, I take Alauddin Textile Mills (ATM) Pvt. Ltd. as a field of my investigation and research. This company is also known as ATM lungi factory locally for producing popular product â€Å" ATM Lungi†.This company is to conduct many of it’s activities for supplying it’s well-known product to the customers . Of them, I chose it’s supply chain management as my research field. Because, supply chain management is an inevitable part of any company. I noticed it’s all supply chain activities very closely. In recent years, supply c hain management (SCM) has been developed as essential management philosophy and practice for all business operations. As with other business management principles, SCM also applies to the textile and apparel industries.A sound supply chain management helps to identify the supplier and the customer demand that operation must satisfy, link customer demand with suppliers and production plans, and keep the operation function focused on satisfying customers’ need. The supply chain not only includes the manufacturer and suppliers, but also transporters, warehouses, retailers, and customer themselves. Supply chain management (SCM) is the synchronized of a firm’s processes and those of its suppliers to match the flow of materials, services, and information with customer demand.It is also a process of managing operations control, resource acquisition and purchasing, and inventory to improve overall efficiency and effectiveness. This paper focuses on some of the major aspects of supply chain management with its major recompense and how to design and implement effective and efficient supply chain management. 1. 2: Background of the company: Alauddin Textile Mills (Pvt. ) is a well known textile industry of Bangladesh. It has achieved it’s fame to produce lungi a native popular product of Bangladesh. Now a days â€Å"ATM Lungi† is now most popular brand in lungi in Bangladesh.Garments and textiles are considered as a beck and belly of earning foreign currency. Especially Dhaka region has the major concentration in establishing garments and textiles. So ATM Pvt. Limited has chosen Tangail and Norshindi which are near at hand of Dhaka, as factory place. It is a private limited firm. The incorporation period of this firm is 1993. Mr. Alauddin (engineer) is the entrepreneur and custodian of this company. He started production in a small amount with small capital and sell it in the local market of Tangail.Initially, he had to face many hardship to c ut a established figure. But,He gradullay become afford to occupy the local market for maintaining good quality product. Thus, in a short possible time ATM Lungi disbursed it’s reputation throughout the whole country. It is registered with Board of Investment ( Bangladesh). This company out and out concerned with textile business. Cotton, Yarn, Fabric are the listed product of this firm. But, Lungi is the finished goods of ATM Limited. It was the outset of this company when the number of worker was only a handful 10-15 and employees were 2 and Mr.Alauddin himself executed his business. Now, about 2300 workers and 200 employees are at the disposal of this company . Female workers have taken the possession of 45% of total number of workers. It is mentionable that this company didn’t allow no child labor so far. This company is also the member of Dhaka Chamber of commerce, and Narshindi &Tangail Chamber of commerce. 1. 3: Statement of the problem: In production plan o f this factory, there are many hardship faced by the production manager. To run production smoothly it is crucial to perform some logistics.These are procurement, operation, distribution, after sale, disposal, human resource management, channel management, material handling logistics etc needed to handle potentially for having a smoothly production . Because for the distance & infrastructure problem, many producer fail to produce as their expectation. Bangladesh is not affluent in producing raw materials of textile industries. It is another problem for why these factories always worry about raw material supply. Besides this, human resource management has become the most critical task in garment or textile ndustries. Actually, companies don’t have enough time to spend to conduct any research to find out these problems. I have tried to find out some problems regarding production point to selling point in this paper. I do believe my report help this company to unearth proble ms regarding SCM. 1. 4: Importance of the study: Theoretical information is not sufficient for business students because there is a gap between theoretical knowledge and practical ground. This internship program has been initiated mainly to less this gap.So, this practical idea on various activities and functions of different department of Alauddin Textile Mills (Pvt. ) Ltd. help me in future to increase my efficiency and effectiveness. . I believe that the analysis, findings and recommendations will be helpful for the organization to effectively utilize the benefit of supply chain management & increase the efficiency and effectiveness of their current operations. The use of these tools enables the textile industries to greatly increase its profitability because it is able to match supply and demand in a much more coordinated fashion.Therefore, the importances of this study are- †¢ To gather practical knowledge about supply chain activities of textile mills in Bangladesh. à ¢â‚¬ ¢ It helps to scrutinize the strength and weakness of the company’s SCM system. †¢ Finding the problem regarding SCM. †¢ It will Measure efficiency of the company in all logistics. †¢ Finding the gap of previous research regarding this. †¢ Recommending some suggestion against the problems 1. 5: Objectives of the study: Objective means the target concern for which certain effort or works are performed. There may be a single objective or multi-objectives.So the objective should be identified firstly, and on the basis of objectives or with a view to achieve that objectives the plan is designed and next steps are taken to implement the outline about the objectives. So, the main objectives of this study is are- * Achieving a realistic idea of existing system of Supply Chain Management of this industry. * Problems faced by the participants. * Opinion of different groups faced the problems. * To give a few suggestions. 1. 6: Methodology: This report is being tried to complete micro level study in a confined, specific, and a given period.To prepare the report I have followed some specific methods and technique, which were helpful for collecting and analyzing data. After I determined what and why I am looking for, then I set adrift our boat to the sea. In this report I have used primary and secondary data. After getting adequate materials I then went through the materials and was trying to find the answer of my objective questions. Within the process I had to contact with my supervisor sir. Evaluating all the information I gathered different record and statement of ATM privet limited, BTMA report has helped me preparing this report.The subject material of this report is on primary and secondary sources of data and information. Sources of information:  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Primary source * Relevant document studies   as provided by the officers concerned. * Ob servation of various departments. * Collection information from suppliers and customers through questionnaire. Secondary source * Annual report of ATM privet limited. * Prospectus of ATM private limited . *   Brief of ATM privet limited chief officers and staff. * Extensive literature search on the basis of document and publication, BTMA, BTMC, BGMEA. Interview supplying agents and customer of the company through questionnaire. Population: The study is about supply chain management of the company so the populations are considering as supplier agents and all the customer of the company. Sample: Sample is a subset, or some part, of large population. It is not possible to take all data in report writing so I am take sample for data analysis. I have taken ten samples from the supplier agents and the customer in the company. Sampling: Sampling is the process of using a small number of items or parts of larger population to make conclusions about the whole population.There are various t ypes of sampling. In my study I am follow the simple random sampling. Simple random sampling is a sampling procedure that assures each element in the population an equal chance of being included in the sample 1. 7: Limitations of the study: I won’t say that my study and the decisions I made are self sufficient. That doesn’t mean that there was any dearth of my professionalism and eagerness to reach to the solution, rather it means that I had to face some obstacles. Those may be summarized as follows: * It was so difficult to collect the adequate and real data from the assigned organization. Lack of experience in related field. * The research area was so far from our institution. * Due to the lack of time I could not acquire in depth knowledge of the activities of different department perfectly and clearly.. * Improper combination among various departments. * There was not any research regarding this topic in this institution. So, it was complication for me to collect d ata collection. * Adequate books, publication and journals were not available. * The respondents were not aware enough about my work. It took me more time to conduct my research. 1. : Tentative presentation of the study: This report is composed of eight chapters, which are further divide into different parts. In the first chapter, the introductory portion has been present along with background of the study, Importance of study and the objective of the study and the methodology, limitation and Literature review discuss in chapter two. A conceptual framework is included in chapter three from where we will be able to get the basic idea about the operation of the company. Chapter four includes result and discussion based on objective of the study.From where the textile mill collect raw materials, how they collect the raw materials, what are the basic raw material required by the spinning sector are discussed in this chapter. What are the main considerations in selecting suppliers, proce ss of making order for raw material, landing procedure of import are also discussed in the chapter. The summary and recommendation of the study are discussed in chapter Five. Chapter six highlighted the reference of the study from where I gathered theoretical knowledge about it. Chapter seven exposes bibliography.And in chapter eight, I have discussed appendices that include some table figure and questionnaire. Chapter Two: Literature Review A literature review is a body of text that aims to review the critical points of current knowledge including substantive findings as well as theoretical and methodological contributions to a particular topic. Literature reviews are secondary sources, and as such, do not report any new or original experimental work. Most often associated with academic-oriented literature, such as a thesis, a literature review usually precedes a research proposal and results section.Its ultimate goal is to bring the reader up to date with current literature on a t opic and forms the basis for another goal, such as future research that may be needed in the area. There are lots of researches in supply chain management in world. There are many books also regarding SCM. Graham Heaslip (School of Business and Humanities, Department of Management Studies, Institute of Technology Carlow, Ireland) on his book of Supply Chain Management: Strategy, Planning and Operation he tried to identify the core activities of SCM of any firm. He discuss about strategy needed to operate SCM activities for smoothly run of production.Ning Cao, Zhiming Zhang, Chester To and Roger Ng (Institute of Textiles and Clothing, The Hong Kong Polytechnic University) in their study of â€Å"Supply Chain Management Practice and Competitive Advantage in Textile and Apparel Industries† they conducted an empirical study. They showed there the overall practices of Supply Chain management of various industries in Hong Kong. Pankage Chandra (Professor of Operations & Technol ogy Management) Publish a research on â€Å"The Textile and Apparel Industry in Indian,† in The Oxford Companion to Economics in India, 2007.He analyzed Manufacturing management; Supply chain coordination; Building technological capabilities; Hi-tech entrepreneurship in his research. An article written by Prof. Atanu Ghosh on â€Å"Supply Chain for the Apparel Industry – Some Tips†Ã‚  was  published in RETAIL e-LETTER of the Retail Vision Group, Issue No. 21, 20th November 2003. He also give some recommendation regarding textile industries SCM practices. A research was conducted in Makson Spinning mills Ltd by Student of BRAC University in Bangladesh. They measured the efficiency of practices of SCM management of Makson Spinning mills Ltd.They also showed Prospectus of MSML, published on 18 September-2008 By Kazi Anwarul Masud in study of Bangladesh Economy- Problems & Prospects with garments and textile industries- Part II on march 2010 mentioned the econ omic philosophy of textile industries in Bangladesh. Problems and Prospect of Garments Industry in Bangladesh (Part-7) By  Abu Zafour Published 19 October 2009 is another study regarding this. There are problem of garment and textile industries in Bangladesh. Chapter Three: Conceptual Framework of Supply Chain A supply chain (SC) consists of all parties involved, directly or indirectly, n fulfilling a customer request. The supply chain not only includes the manufacturer and suppliers, but also transporters, warehouses, retailers, and customer themselves. Within each organization, such as a manufacturer, the supply chain includes all functions involved in receiving and filling a customer request. These functions include, but are not limited to, new product development, marketing, operations, distribution, finance, and customer service. Supply chain management (SCM) is the management of a network of interconnected businesses involved in the ultimate provision of product and service packages required by end customers.Supply chain management spans all movement and storage of raw materials, work-in-process inventory, and finished goods from point of origin to point of consumption (supply chain). Another definition is provided by the APICS Dictionary when it defines SCM as the â€Å"design, planning, execution, control, and monitoring of supply chain activities with the objective of creating net value, building a competitive infrastructure, leveraging worldwide logistics, synchronizing supply with demand and measuring performance globally A typical supply chain may involve a variety of stages. These supply chain stages includes: * Customers Retailers * Wholesalers/Distributors * Manufacturers * Component/ Raw material suppliers A firm can vary supply of products by controlling a combination of the following two factors: ? Production capacity ?  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Inventory Following I list some specific approaches to managing capacity and inventory with the g oal of maximizing profits. Managing Capacity: When managing capacity to meet predictable variability, firms use a combination of the following approaches. a)  Ã‚  Ã‚  Ã‚   Time flexibility from workforce b)  Ã‚  Ã‚  Ã‚   Use of seasonal workforce. c)  Ã‚  Ã‚  Ã‚   Use of subcontracting. d)  Ã‚  Ã‚  Ã‚   Use of dual facilities )  Ã‚  Ã‚  Ã‚   Designing product flexibility into the production in processes Managing Inventory: When managing inventory to meet predictable variability, firms use a combination of the following approaches: a)  Ã‚  Ã‚  Ã‚   Using common components across multiple products b)  Ã‚  Ã‚  Ã‚   Build inventory of high demand or predictable demand products. All the Supply Chain drivers discussed up until this point have dealt directly with some physical aspect of the supply chain. Information is the supply chain drivers that serves as the glue allowing the other three drivers to work together to create an integrated, coordinated supply chain.Informatio n is crucial to supply chain performance because it provides the foundation on which supply chain processes execute transactions and managers make decisions. With out information, a manager will not know what customers want, how much inventory is in stock, and when more products should be produced and shipped. In short, without information a manager can only make decisions blindly. Therefore, information makes the supply chain visible to a manager. With this visibility, a manager can make decisions to improve the supply chain’s performance.In much way’s information is the most important of the four supply chain drivers because without it, none of the other drivers can be used to deliver a high level of performance. Given the role of information in a supply chain’s success, managers must understand how information is gathered and analyzed. This is where IT comes into play. IT consists of the hardware and software throughout supply chains that gather, analyze, and act on information. IT serves as the eyes and ears of management in a supply chain, capturing and analyzing the information necessary to make a good decision.Using IT system to capture and analyze information can have a significant impact on a firm’s performance. For example, a major manufacturer of computer work stations and serves found that much of the information on customer demand was not being used to set production schedules and inventory levels. Information is the key to the success of a supply chain because it enables management to make decisions over a broad scope that crosses both functions and companies. Information must have the following characteristics to be useful when making supply chain decisions: 1.Information must be accurate: Without information that gives the true picture of the state of the supply chain, it is very difficult to make good decisions. That is not to say all information must be 100 percent correct but rather than the data available paint a picture of reality that is at least directionally correct. 2. Information must be accessible in a timely manner: Often a accurate information exists, but by the time it is available, it is either out of date or if it is current, it is not in an accessible form. To make good decisions, a manager needs to have up-to-date information that is easily accessible. 3.Information must be of the right kind: Decision makers need information that they can use. Often companies will have large amounts of data that is not helpful with decision making. Companies must think about what information should be recorded so that valuable resources are not wasted collecting meaningless data while important data goes unrecorded. Supply chain management is a cross-functional approach to managing the movement of raw materials into an organization, certain aspects of the internal processing of materials into finished goods, and then the movement of finished goods out of the organization toward the end-consume r.As organizations strive to focus on core competencies and becoming more flexible, they have reduced their ownership of raw materials sources and distribution channels. These functions are increasingly being outsourced to other entities that can perform the activities better or more cost effectively. The effect has been to increase the number of organizations involved in satisfying customer demand, while reducing management control of daily logistics operations. Less control and more supply chain partners led to the creation of supply chain management concepts.The purpose of supply chain management is to improve trust and collaboration among supply chain partners, thus improving inventory visibility and improving inventory velocity. Several models have been proposed for understanding the activities required to manage material movements across organizational and functional boundaries. SCOR is a supply chain management model promoted by the Supply Chain Management Council. Another mo del is the SCM Model proposed by the Global Supply Chain Forum (GSCF). Supply chain activities can be grouped into strategic, tactical, and operational levels of activities.Strategic * Strategic network optimization, including the number, location, and size of warehouses, distribution centers and facilities. * Strategic partnership with suppliers, distributors, and customers, creating communication channels for critical information and operational improvements such as cross docking, direct shipping, and third-party logistics. * Product design coordination, so that new and existing products can be optimally integrated into the supply chain, load management * Information Technology infrastructure, to support supply chain operations.Tactical * Sourcing contracts and other purchasing decisions. * Production decisions, including contracting, locations, scheduling, and planning process definition. * Inventory decisions, including quantity, location, and quality of inventory. * Transportat ion strategy, including frequency, routes, and contracting. * Benchmarking of all operations against competitors and implementation of best practices throughout the enterprise Operational * Production and distribution planning, including all nodes in the supply chain. Production scheduling for each manufacturing facility in the supply chain (minute by minute). * Demand planning and forecasting, coordinating the demand forecast of all customers and sharing the forecast with all suppliers. * Sourcing planning, including current inventory and forecast demand, in collaboration with all suppliers. * Inbound operations, including transportation from suppliers and receiving inventory. * Production operations, including the consumption of materials and flow of finished goods. * Outbound operations, including all fulfillment activities and transportation to customers. Order promising, accounting for all constraints in the supply chain, including all suppliers, manufacturing facilities, distr ibution centers, and other customers. Chapter Four: Result and Discussion In this chapter, the study needs to discuss about the existing production system where the SCM system will be focused according to the first objective of this study. Here, there is a chronological discussion about the existing supply chain management activities. The following are the raw materials needed producing finished product of this company- 4. 1: Textile fibersFibers used for the production of yarn are called textile fibers. All the fibers are not textile fibers, textile fibers must have some of the essential characteristics e. g. 1)  Ã‚  Ã‚  Ã‚   Minimum length to insert twist. 2)  Ã‚  Ã‚  Ã‚   Strength 3)  Ã‚  Ã‚  Ã‚   Fineness 4)  Ã‚  Ã‚  Ã‚   Pliability or flexibility 5)  Ã‚  Ã‚  Ã‚   Cohesiveness 6)  Ã‚  Ã‚   Rigidity or stiffness 7)  Ã‚  Ã‚  Ã‚   Elongation & Elasticity 8)  Ã‚  Ã‚  Ã‚   Moisture Absorbency etc. Classification of textile fibers: Different textile fibers are used in textile industry. Some of them we get from natural sources and some of them are man-made classification of fibers are shown in the following chart:Figure: Classification of Textile Fiber 4. 2 Basic Considerations in selection of raw material Textile fiber’s length analysis Wide variations of fiber lengths occur within a fiber of the same source as well as between varieties obtained from different source. Staple fibers include all natural fibers except, sild-sidk is a natural filament fiber Man-made fibers, manufactured in filament form, and silk filament fibers may be cut up to form short staple fibers. Staple is fiber of cotton, wool or ramie etc. of no more than a few inches long. Filament is usually a manmade fiber of indefinite length.The size of yarn is usually related to the weight of the fabric, for heavy fabrics we use thick yarn, for light fabrics we use fine yarn. Textile fiber’s diameter analysis: The diameter of a fiber is the distance across the fiberà ¢â‚¬â„¢s cross section. The diameter of  Ã‚   natural staple fibers is irregular and may vary from one part of the fiber to another. Staple fiber diameters are measured in microns. The diameters of the smooth, even filament man-made fibers is uniform 4. 3 Characteristics of textile Spun yarn * Composed of short staple fibers of definite length Made from natural cotton, flax or wool staple fibers * Made from natural or Man-made filaments which are chopped or cut into short lengths and referred to as filament staple yarn. * Individual fiber length vary * Bigger and wider in diameter than filament fiber yarns. * Fuzzy appearance and feel; fiber ends protrude from yarn * Uneven number of fibers throughout * Range from soft, loose construction to hard finished, fine twist yarn * Thick and thin areas highly twisted * Fall apart when untwisted * Dull or flat in appearance * Rough to the touch Natural textural appearance and feel * Bulkier to the feel * Provide good covering power * Snagg ing depends on fabrics structure * Pilling depends on fiber content 4. 4 Characteristics of textile blended yarn & fabric In order to achieve certain appearance, and effect on fabrics or to avoid paying high import duty on garments to be exported to the exported to the United States which is the biggest buyer of garments from the Asian producing countries, we often mix different fibers in the yarn to make fabrics. Instead of using only one kind of fiber, we may use 2 or 3 kinds.As each kind of fiber has its own characteristics, when we plan to mix them, we should consider their characteristics to create a hybrid with the characteristics we need. Therefore it is important that we know the characteristics of the following key fibers: Cotton: Soft, very absorbent, shrinks when washed easy to crease. Ramie & linen: Compared to cotton, not soft, less absorbent, shrinks when washed, but to a less extent, easy to crease Rayon: Compared to cotton, softer than cotton equally absorben t, Shrinks more than cotton, very easy to crease, has a luster like silkPolyester: Compared to cotton, not soft, absorbent at all, does not shrink in normal wash not easy to crease Wool: The characteristics vary dependent on the kind of wool it is, but it has these general characteristics: Compared to cotton, not very soft, not absorbent. The staple is slightly crispy which can lead to a bulky effect when finally made into fabrics. It shrinks seriously when washed in hot water. Not easy to crease. Nylon: Can be soft or firm dependent on the finish applied, not absorbent, does not shrink when washed, not easy to crease, very strongSilk: Finer and softer than cotton, equally absorbent, shrinks more than cotton easy to crease, has a smooth surface with luster when it is made into fabric. Acrylic: Not soft, not absorbent, dies not shrink in normal wash. The staple is slightly 4. 5 Suppliers Selection and Contracts Once the analysis has been completed, a list of promising suppliers will emerge. The firm select desired suppliers using a variety of mechanisms including off- line competitive bids, reserve actions, or direct negotiations. No matter what mechanism is used, supplier selection should be based on total cost of using a supplier and not just the purchase price.Before selecting a supplier, the firm must decide whether it will use single sourcing or will have multiple suppliers from which to source the product. Single sourcing is used to guarantee the supplier sufficient business when the supplier has to make a significant buyer-specific investment. Once suppliers have been selected, contracts have to be structured between the buyer and each supplier. 4. 6 Placement Process of an Order ATM places the order of raw materials to the suppliers. When placing an order for raw materials it needs highest 30 days.For placing an order they use some medium, the mediums are: ? E-mail ?  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Fax ?  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Letter ?  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Phone The company asks for proforma invoice from the suppliers using the aforesaid means of communication where the terms and conditions are mentioned clearly. 4. 7 List of Banks involved in import of ATM Dutch Bangla Bank Ltd Norshindi Brach, Norshindi Pubali Bank Ltd. Tangail Branch, Tangail. 4. 8 List of Major local Agents of ATM 1. A. R. Cotton 2. Dhaka Cotton 3. Trade Scan Int'l 4. Desh cot 4. 9 List of Major Supplier of raw cotton of ATM 1. Indian Cotton Company-India 2.LGW Industries 3. P. D. Sekhsaria-India 4. Omprakash Shiva. 4. 10: The Procurement Process Once supplier have been selected, contracts are in place, and the product has been designed, the buyer and supplier engage in procurement transactions that begin with the buyer placing the order end with the buyer receiving and paying for the order. When designing the procurement process, it is important to consider goods that the process will be used to purchase. There are two main categories of purchased goods Direct an d Indirect materials. Direct materials are components used to make finished goods.Indirect materials are goods used to support the operations of a firm. A good example of a procurement process that focuses on these objectives is the e-Hub initiative at Cisco. As ATM Mills Ltd. Produce 100% cotton yarn only, the main raw material is the Fibers. The company imports fibers from, Canada, Uzbekistan, Kazakhstan, India, and Pakistan etc. Imports of raw cotton by ATM in June-2011 SL| SELLER| INDENTOR| L/C NO| Description| Bales| 01| Cargil Cotton, U. K| Bakul Ltd. | 2217-08-01-0470| Origin-UzbekistanGrowth-SM, Staple-1. 1/8†,Mic- 3. 8-4. 9 NCL,| 1110| 02| Mambo Commodities, U.K| Dhaka Cotton| 3037-08-02-0003| Growth-Benin, Grade:Kaba-SStaple- 1. 1/8†, Mic-3. 5-4. 9 NCLPressley-29 GPT| 1106| 03| Plexus Cotton, U. K| Bakul Ltd. | 1335-08-01-0534(Bulbul Tex)| Origin- MaliStaple-1-1/8†,| 1092| 04| Cottonex Anstalt, Vaduz| Wellcot Inter’l| 1335-08-01-0541| Origin- CIS ( Uzbek)Grade- Pervey selected-SM| 1164| 08| Cottonex Anstalt| Wellcot Inter’l| 1335-04-01-0611| Origin- CIS(Uzbek) Grade- Pervy Selected-SM, Staple- 1-1/8†,| 1206| | | | Total Bales| 7777| | | | | | | | Statement of Raw cotton Purchase by ATM as on 20 September-2011 1.L/C IN PIPE LINE SUPPLIERINDENTOR| L/C NO. | DESCRIPTION OFRAW COTTON| QTY| VALUE| P. D. SEKHSARIA-INDIADHAKA COTTON CO. | LC- 0793DT. 05-07-08SBL| MCU-5 –30 MM INDIA| 100M/Tons=220,460lbs+150 M/Tons =330,690 lbs (1490 Bales)| $ 156,526. 60$ 234,789. 90$ 3,91,316. 00| P. D. SEKHSARIA-INDIADHAKA COTTON CO. | LC – 0893 DT. 08. 12. 03  Ã‚  Ã‚  Ã‚   SBL| SANKAR-6 (SUPER) –28. 56 MMINDIA| 120 M/Tons =264,552 lbs (720 Bales)| $ 190,477. 44| P. D. SEKHSARIA-INDIADHAKA COTTON CO. | LC – 0916 DT. 17. 12. 03  Ã‚  Ã‚  Ã‚   SBL| MCU-5 –30 MM INDIA| 120M/Tons =264,552 Lbs (720 Bales)| $ 194,445. 2| INDIAN COTTON COMPANY- INDIAA. R. COTTON TRADING, DHAKA| LC – 0023DT. 10. 01. 04| MCU-5, 30 MMINDIA| 244. 9M/Tons=539980 Lbs (1400 Bales)| $ 383,385. 80| 2. RAW COTTON IN BOOKING (L/C DUE FOR OPEN) SUPPLIERINDENTOR| DESCRIPTION OFRAW COTTON| QTY INBALES| QTY IN  LBS| U. PRICE| VALUE| MAMBO COMMODITIES, U. K| KABA-S 1. 1/8†28 GPT| 260 M/TONS| 573,196. 00| USC 76. 00| $435,628. 96| 4. 11 Making Sourcing Decisions in Practice This involves choosing the suppliers that will deliver the goods and services you need to create your products or services.It also involves developing a set of pricing, delivery and payment processes with suppliers and create measurement criteria for monitoring and improving the relationships. Enterprises also need to put together processes for managing the inventory of goods and services that they receive from suppliers, including receiving shipments, verifying them, transferring them to their manufacturing facilities and authorizing supplier payments. 1. Use multifunctional teams: Effective strategies for sourcing result from mul tifunctional collaboration within the firm.A sourcing strategy from the purchasing group is likely to be narrow and focus on purchase price. 2. Ensure appropriate coordination across regions and business units: Coordination of purchasing across all regions and business units allows a firm to maximize economies of scale in purchasing and also to reduce transaction costs. 3. Always evaluate the total cost of ownership: An effective sourcing strategy should not make price reduction its sole objectives. All factors that influence the total cost of ownership should be identified and used for supplier selection.Build long term relationship with key suppliers: A basic principle of good sourcing is that a buyer and a supplier working together will generate more opportunities for savings than the two parties working independently 4. 12: The Role of the Safety Inventory in the Supply Chain Safety inventory is inventory carried for the purpose of satisfying demand that exceeds the amount forec asted for a given period. Safety inventory is carried because demand forecasts are uncertain and a product shortage may result if actual demand exceeds the forecast demand. Figure: Inventory profit with safety inventoryFor any supply chain, there are two key questions to consider when planning safety inventory: 1. What is the appropriate level of safety inventory to carry? 2. What actions can be taken to improve product availability while reducing safety inventory? Impact of Supply Uncertainty on Safety Inventory In many practical situations, supply uncertainty also plays a significant role. Consider the case of the Dell assembly plant in Austin. Dell assembles computers to customer order. When planning the level of component inventory, Dell clearly has to take demand uncertainty into account.Suppliers, however, may not be able to deliver the components required on time for a variety of reasons. Dell must also account for this supply uncertainty when planning its safety inventories. The basic principle of textile is to spin textile fibers into yarn and weaving . Bales of cotton will be opened, mixed and then will be passed through the blow room line to remove dirt, foreign materials and to open the tufts of fibers and ultimately to produce regular lap by scutcher. The laps will pass through the carding machine to individualize the fibers and to remove dirt, neaps ;amp; short fibers and finally produces slivers.As and when necessary these slivers will pass through the lap former to produce comber laps. The laps will be fed to the combing machine to remove the maximum short fibers and ultimately to produce regular slivers. The combed slivers will pass through the drawing frame, where doubling and drafting will be done and will produce regular sliver which will be fed to the simplex rime to produce roving and then ell be fed to the spinning frames where drafting and twisting will be done and will produce yarn in bobbin form. Finally, heat setting of yarn will be done, before coning.Thereafter, individual cones will be wrapped in polythene packing in paper cartons ( 100 lb. each carton) and sent to the market. In rotor card sliver will be feed to the draw frame 1st and 2nd passage after that final drawing sliver will be feed to the rotor frame and in rotor frame drafting and twisting will be done and finally yarn will be wind in cone form these cone will be delivered to knitting section 50% will be sold out. Figure: Flow chart for producing yarns at ATM Enterprises need to schedule activities necessary for production, testing, packaging and preparation for delivery.This is also the most metric-intensive portion of the supply chain so quality levels, production output and worker productivity have to be measured. 4. 13: Spare Parts and machinery used By ATM for yarn production To produce the export yarn the following Spare Parts and m/c s are mainly used by ATM SL| Name of section| Machine and spare parts specification| Quantity| 01| Blow room | Foreign Fiber Detector| 1. Nos| | 02| Carding| Taken in under Casing Segment and Stationary Flat| 14. Nos| | 03| Carding| Stripping Roller For Flats| 14. Nos| | 4| Simplex| Simplex Saddle Spring SKF Germany| 1000 Nos| | 05| Simplex| Simplex PVC Core Cots (Beveled) Size: 1 D = 19 mm  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   0 D = 28 mm  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Length = 39 mm| 1800 Nos| | 06| Simplex| Spacer White and Green Original SKF| 500+500=1000 Nos| | 07| Simplex| Flyer Presser For FL 16  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚     Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   ( 108 Spindle)| 100 Nos| | 08| Ring| Cot Irradiation Machine( U. V Treatment)| 1 Nos| | 09| Finishing| Yarn Conditioner micHeat Salting| 1 Nos| | 10| Quality Control| H V I / H F I Mic( For Fiber Testing)| 1 Nos| | 11| Quality| Twist Tester| 1 Nos| | 2. | Weaving| Power loom| 150| | 4. 14: Textile Yarn Construction Yarn count, yarn ply and yarn construction interrelate to form the characteristics of yarn. Yarn construction is classified as: a)  Ã‚  Ã‚  Ã‚   Simple/ conventional yarns are two or more simple single yarns plied or twisted together. They are referred to as two three, four, five or six ply yarn. Size and number of plies may be changed for different weaves or fabric structures. b)  Ã‚  Ã‚  Ã‚   Complex/Novelty Yarns are single or plied yarn structures characterized by international introduced irregularities in size and twist effects.The irregularities of novelty yarns may be uniform. c)  Ã‚  Ã‚  Ã‚   Metallic Yarns produced by lacquering aluminum pigment or by laminating aluminum foil between layers of plastic. Since metallic yarns are flat rather than round as most other man- made fiber yarns, the size of the yarn is specified in  inches. d)  Ã‚  Ã‚  Ã‚   Textured Yarns are the end result of physical, chemical o r thermal manipulation of fibers and yarns so that they are no longer straight or uniform. The manipulation process of textured yarns results in the modification and altering of the arrangement of fiber and yarn. )  Ã‚  Ã‚  Ã‚   Stretch Yarns may be applied to yarns by chemical or mechanical methods. Not all methods or fibers will achieve equality effective stretch properties. 4. 15: Discussion on new spinning systems Open-End Rotor spinning: The most successful of the new spinning systems is open end rotor spinning which is now termed as conventional spinning system. The success of rotor spinning is due to the increase of its productivity. Advantage of rotor spinning: 1. Lower labor cost 2. Less power consumption 3. Cheaper raw material 4. Larger package size 5. Higher productivity, because of higher speed 6.Elimination of roving, no use of simplex m/c 7. easy handling Wrap spinning: The wrap or hollow spindle spinning system uses the tecjmoque of wrapping, a continuous filament yarn round a central core of parallel staple fiber and this system can be used for both short and long staple. Wrap spinning is considered as complementary to the ring and not a complete replacement. It is suitable for coarse count up to 30s. Friction spinning: The basic principle of friction spinning is that it is an opening system, the fibers are carried with an air flow forward the collecting area between two friction surfaces.Friction spinning, like air jet spinning is limited in practice by the yarn quality. Finer count yarn produced in friction spinning than ring or Rotor spinning with comparatively production level. 4. 16: Textile Yarn finishing system ATM Yarn finishing starts after Ring till transfer to finished store For Hank form  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   For cone form Figure: Process sequence of fini shing 4. 17: Weaving and dyeing: Weaving is a method of fabric production in which two distinct sets of yarns or threads are interlaced at right angles to form a fabric or cloth.The other methods are knitting, lace making and felting. The longitudinal threads are called the warp and the lateral threads are the weft or filling. The method in which these threads are inter woven affects the characteristics of the cloth. Cloth is usually woven on a loom, a device that holds the warp threads in place while filling threads are woven through them. The way the warp and filling threads interlace with each other is called the weave. The majority of woven products are created with one of three basic weaves: plain weave, satin weave, or twill.Woven cloth can be plain (in one color or a simple pattern), or can be woven in decorative or artistic designs. As the final product of ATM is Lungi , it follows very easy method to complete the production process. 1500 shuttle and 250 shuttles-less weavin g machine is used in weaving cotton gray and madras check fabric. Weaving back process Yarn –dying, sizing, checking design included to speed up and quality control. It produce two types of lungi. First type needs not to dyeing because it’s color is determined by yarn color. That means this type of Lungi’s color is automated by the color.The second type of Lungi need dying. Because, it is made from the fabric. The fabric needs dying. Dyeing: Modern overflow and Jet dyeing machinery is used in latest rotary and flat bed printing process. 200000 y ds per week production capacity is running at 90% efficiency. Also traditional batik print is its specialty. 4. 18: Problems occurring in SCM and remedial measures of ATM: According to the second and third objective of the study, there is a discussion here about problems and remedial measures of SCM of ATM faced by the various participants in the factory.Actually, problems occur in different sector of activities and the remedial measures are suggested by the various participants work in the sectors concern. These are narrated in below. Yarn Faults Some commonly occurring yarn faults and the methods of controlling them are as follows: a)  Ã‚  Ã‚  Ã‚   Slubs: Slubs are fish shaped thick places from 1 cm. to 4 cm. long and about 5-8 times larger than the average yarn diameter at the thickest portion. Slubs formed earlier stages due to poor drafting would get substantially elongated during I ring frame drafting and would get appear as slubs in the yarn.It  can be controlled in carding stage and then Ring frame. b)  Ã‚  Ã‚  Ã‚   Cracders: Crackers are short coil-like places in the yarn. Cracker occurs frequently in polyester or polyester-cotton yarns. Remedial steps: 1)  Ã‚  Ã‚  Ã‚   Increase top arm pressure 2)  Ã‚  Ã‚  Ã‚   Use large diameter and narrow width top rollers 3)  Ã‚  Ã‚  Ã‚   Ensure that the traverse motion functions properly 4)  Ã‚  Ã‚  Ã‚   Use of wider apron spacers 5)     Ã‚  Ã‚   Increase breaks draft 6)  Ã‚  Ã‚  Ã‚   Reduce twist in roving 7)  Ã‚  Ã‚  Ã‚   Wider back zone setting 8)  Ã‚  Ã‚  Ã‚   Use of heavier traveler 9)  Ã‚  Ã‚  Ã‚   Avoid stopping of ring frames. )  Ã‚  Ã‚  Ã‚   Spinner’s doubles: This fault consists of the yarn becoming double in its thickest at some portions. Causes: 1)  Ã‚  Ã‚  Ã‚   Rove from an inter bobbin in the creel at ring frame going along with the neighboring end. 2)  Ã‚  Ã‚  Ã‚   The ring frame tenter permitting doubled rove to be fed into the drafting system at the time of replacing a near empty inter bobbin in the creel. 3)  Ã‚  Ã‚  Ã‚   The strand issuing from the front rollers at ring frames going along with an adjacent end on the ring bobbin. Remedy: The ring frame tenter should be trained to replace the creel bobbin with a roper piecing of the rove and not by letting the fresh rove overlap with the in going rove at the feed. To transfer the lap from the lap pin to a lap rod to suitab ly handle and feed it to the subsequent m/c (carding) Action of Blow Room Line: 1. Action of opposing spikes 2. Action of air currents 3. Action of beaters 4. Regulating Action Wastage in Blow Room: 1. Droppings 2. Dust 3. Filter waste Faults in Blow: 1. Irregular lap 2. Knocking off before completion of full lap 3. Rough appearances of full lap 4. Lap sheet thicker at one side than at the others 5. Soft lap 6. Lap licking 7. Droppings under beater ;amp; grid bars. . Formation of conical lap 9. Formation of conical lap 10. Barrel shaped lap 11. Ragged lap selvedges. Types of Beater in Blow room: 1. Porcupine beater 2. Bladed beater l 3. Krishna beater Carding: Objects of carding m/c: 1. To open the tuft of fibers 2. To make the fibers parallel ;amp; straight 3. To remove remaining trash particles 4. To remove short fibers 5. To remove naps 6. To produce a rove like fiber called sliver, which is uniform in per unit length Main actions of carding machine: 1. Action between feed roller ;amp; taker 2. Action between taker in and cylinder 3. Action between cylinder and flat . Action between cylinder and doffer Useful sliver hanks of different counts: Count of yarn:  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   10s,  Ã‚  Ã‚  Ã‚  Ã‚   20s,  Ã‚  Ã‚  Ã‚  Ã‚   32s,  Ã‚  Ã‚   40s,  Ã‚  Ã‚  Ã‚   60s,  Ã‚  Ã‚  Ã‚  Ã‚   80s Hank of carded sliver:  Ã‚  Ã‚   0. 125,  Ã‚   0. 125,   0. 13,  Ã‚   0. 135,   0. 145,   0. 165 Wastage in carding: 1. Taker in waste 2. Flat strip 3. Motes ;amp; flies 4. Sliver cut 5. Filter waste Draw Frame: Objects of draw frame 1. Straightening of crimped and hooked fibers 2. Paralleling of fibers 3. to produce more uniform of sliver of definite wt. / yd 4. To reduce the wt. /yard of materials fed. 5. To make perfect blending / mixing of the component fibersWastage in Draw frame 1. Filter waste 2. Clearer waste 3. Sliver cut Comber: Objects of Comber 1. To remove the fibers shorter than a predetermined length 2. To remove remaining impurities in the comber lap 3. To remove naps in the carded sliver. 4. To make the fibers more parallel and straight 5. To produce a uniform sliver of required per unit length. Necessity of Combing: 1. Clean fiber 2. Uniformity in length of fiber 3. Absence of naps 4. More parallel arrangement of fibers 5. Straight fibers The above quality of fibers can only be obtained by combing. Speed Frame: Objects of Speed frame: 1.Attenuation of draw sliver to a suitable size for spinning 2. To insert a small amount of twist to strengthen the roving 3. To wind the twisted strand roving into a bobbin Operation involved in speed frame: 1. Drafting 2. Twisting 3. Laying out 4. Winding 5. Building motion Winding: If spinning tension is grater than yarn strength in Ring frame, then end breakage is occurred and also due to roller lapping A. Technological causes B. Mechanical causes A. Technological causes: 1. Insufficient twist in yarn 2. If travelers fly off. 3. Subbing thr ough 4. Stretched roving 5. Faulty drafting roller setting 6.Faulty Traveler selection 7. Excessive yarn tension 8. Improper atmospheric conditions B. Mechanical Causes: 1. Faulty drafting system 2. Worn out ring and traveler 3. Faulty gear and wheels 4. Worn out top rollers 5. Faulty apron 6. Spindle vibration 7. Eccentric ring Remedy: Both the Technical and Mechanical causes should be taken into account and be careful while winding. Chapter Five: Summary This chapter will discuss about some recommendations to conclude the study. According to the last objective of the study, it is needed to design a conclusion providing some recommendation to solve the problems identified.In former portion of the study, some problems are shown regarding the SCM activities of the ATM. Some recommendation are narrated in below- 5. 1: RECOMMENDATIONS I have found a fewer number of factors, which impede the achievement of ultimate goals of Alaudding Textile (pvt. ) Mills Limited. It is not easy to find out the solution by only three months internship. But it can be said that the suggestions mentioned below will obviously increase the efficiency of ATM Limited. 1. Shippers must ship the consignment of cotton within the stipulated date as mentioned in the Letter of credit.Delay in shipment shall be entertained without prior approval of the buyer for extension of shipment date. 2. Government should reduce tax and tariff on Textile spares, Textile dyes, Chemical and sizing materials. 3. A committee be formed with members from various importing and exporting countries to review the existing rules and procedures and suggest reformulation of mew rules due to changes that are being taken place in World Trade. 4. Arbitration Board to be reconstituted with members from buyers and sellers country and one to be inducted on the recommendation of ICA. . Arbitration to be held in the country of buyer. 6. Compensation to be paid due to supply of inferior quality cotton should be fixed on the bas is of nominal rate fixed by ICA from time to time. 7. Membership fees should be reduced to attract more individual members. 8. The Spinning sector offers lower interest rate on long term and working capital. 9. The compensation as well the benefit package will restrain the employees to leave their assignment and go for any employee movement for higher benefit packages. 0. The Sector should prosper in a situation of political stability and a congenial business environment. Political turmoil and the disturbance are bad for the economy and so also for us. So, Proper steps should be taken by the government to keep this sector free from politics. Finally, the project should be equipped with world’s modern and latest machinery and  Ã‚  Ã‚  technology to cope with the pace in harmony with modern textile world. The Company should situate at a high land where less record of flood.The factory building should have strong RCC foundation, RCC floor, pre-fabricated steel structure to wit hstand wind, storm, rain etc. along with good drainage facility. 5. 2: Conclusion Sophisticated technology and high thought laboratories have been introduce in the production process, which brought new dimension in the purchasing, procuring, storing and maintaining supplies and inventories. The improved transportation and communication as well as competitors threat has made the issue more challenging and competitive. Thus, the usage and need for supply chain management are increasing dramatically.Further, global competitions require the companies’ continuous response to the customer with new products and replace those that become obsolescence, for these reason companies are combating to find new suppliers and building strong and long-term relationship with them. Hence, managers must have to very rational, logical and sensitive in designing and implementing proper supply chain management in order fight and compete against competitors and attaining organizational goals. Before selecting a supplier, a firm must decide whether it will use single sourcing or will have multiple suppliers from which to source the product.Single sourcing is used to guarantee the supplier sufficient business when the supplier has to make a significant buyer-specific investment. Once suppliers have been select, contracts have to be structured between the buyer and each supplier. Supply chains can influence demand by using pricing and other forms of promotion. Marketing and sales often make the promotion and pricing decisions and they typically make them with the objective of maximizing revenue. Pricing decisions based on revenue considerations often result in a decrease in overall profitability Chapter six: Reference References:   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Krajewski and Ritzman, Operations Management- strategy and analysis, 6th Edition ? Sunil Chopra, and Peter Meindl, Supply Chain Management- strategy, planning and operation, 2nd Edition ?  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Khan ;amp; jain(20 04), Financial Management-text ;amp; Problem,3rd edition, p. g 4. 1-4. 57 ? Prospectus of ATM, published on 18 September-2008. ?   http://www. itwm. fraunhofer. de/zentral/download/berichte/bericht26. pdf. ?   http://bgmea. com. bd/index. php? option=com_content;amp;task=view;amp;id=12;amp;Itemid=26 ? www. atmbd. com prospectus ?   http://66. 102. 1. 104/scholar? hl=en;amp;lr=;amp;q=cache:OKTGNo7eptwJ:unnayan. rg/Solidarity_Forum/Spinning_the_Chain_Lost_in_the_Queue. pdf+spinning+sector+of+Bangladesh Chapter Seven: Bibliography 7. 1: Bibliography A research was conducted in Makson Spinning mills Ltd by Student of BRAC University in Bangladesh:Prospectus of MSML, published on 18 September-2008 By  Abu Zafour : Problems and Prospect of Garments Industry in Bangladesh (Part-7) Published 19 October 2009. By Kazi Anwarul Masud: istudy of Bangladesh Economy- Problems ;amp; Prospects with garments and textile industries- Part II on march 2010, the economic philosophy of textile ind ustries in Bangladesh.Draft final report on the situation of Bangladesh silk Industry-By The dyeing and finishing. Graham Heaslip: Strategy, Planning and Operation of textile Industries (School of Business and Humanities) 2007. Ning Cao, Zhiming Zhang, Chester To and Roger Ng : â€Å"Supply Chain Management Practice and Competitive Advantage in Textile and Apparel Industries† (Institute of Textiles and Clothing, The Hong Kong Polytechnic University) Pankage Chandra: â€Å"The Textile and Apparel Industry in Indian,† in The Oxford Companion to Economics in India, 2007. Professor of Operations ;amp; Technology Management)Manufacturing management; Supply chain coordination; Building technological capabilities; Hi-tech entrepreneurship in his research. Prof. Atanu Ghosh : â€Å"Supply Chain for the Apparel Industry – Some Tips†Ã‚  was  published in RETAIL e-LETTER of the Retail Vision Group, Issue No. 21, 20th November 2003. Regarding textile industries SCM practices. Stanton, J, Willian, Michael J Etzel ;amp; Bruce J Walker, Fundamentals of Marketing, McGrow Hill, intentional Book Company, London. Chapter Eight: Appendices Questionnaire for the members participating in inbound activitiesDear Sir, I am a student of BBA program, Rajshahi University, is undertaking an academic internship program on the topic -â€Å"Supply chain management of ATM Pvt. Ltd. : A critical analysis† for this I need your sincerely co-operation in filling the following questionnaire, I assure that the information provided by you will be kept confidential anonymous and will be used for academic purpose only. Please give your agreement about flowing question carefully and give your answer. 1. What is the SCM system in this company? 2. What is the SCM managing policy? 3. What is the importance of IT in SCM in textile? . What is raw material used by ATM? Types of raw material? 5. Import of raw material. 6. How do you select suppliers and who are the supplie rs? 7. Which are Banks involved in Import? 8. Process of raw material. 9. Is there any Safety management in production? If, yes, how? 10. Spare parts used in production 11. How is yarn constructed by this company? 12. Spinning system of this mill. 13. Weaving system of this mill. 14. Does Company maintain a good working environment? If yes why? 15. Does the company timely pay salary? 16. Inter-communication system among the department of the company. 7. Are all the SCM members co-operating to each other? 18. All the SCM members are contributing in creating companies goodwill. 19. Supplier supply materials properly. 20. Is Storage capacity of the company enough? 21. Does Company maintain proper inventory management? 22. Does The Company train the SCM members in adapting new equipment? 23. Are you satisfied about the company’s performance? Questionnaire for customer Dear Sir, I am a student of BBA program, Rajshahi University, is undertaking an academic internship program on th e topic -â€Å"Supply chain management of ATM Pvt.Ltd. : A critical analysis† for this I need your sincerely co-operation in filling the following questionnaire, I assure that the information provided by you will be kept confidential anonymous and will be used for academic purpose only. (Please indicate your satisfaction level about companies’ activities. ) 1. How much satisfied about companies’ communication system? i) Very dissatisfied ii) Somewhat dissatisfied iii) Neither satisfied nor dissatisfied iv) Somewhat satisfied v) Very satisfied. 2. What is your opinion about price of the product? ) Very dissatisfied ii) Somewhat dissatisfied iii) Neither satisfied nor dissatisfied iv) Somewhat satisfied v) Very satisfied. 3. Satisfaction level about quality maintaining of the company. i) Very dissatisfied ii) Somewhat dissatisfied iii) Neither satisfied nor dissatisfied iv) Somewhat satisfied v) Very satisfied. 4. Satisfaction level of product delivery time. i) Ve ry dissatisfied ii) Somewhat dissatisfied iii) Neither satisfied nor dissatisfied iv) Somewhat satisfied v) Very satisfied. 5. Providing transportation facilities of the company is? ) Very dissatisfied ii) Somewhat dissatisfied iii) Neither satisfied nor dissatisfied iv) Somewhat satisfied v) Very satisfied. 6. How much satisfied about compensation of defect product claim Maintaining? i) Very dissatisfied ii) Somewhat dissatisfied iii) Neither satisfied nor dissatisfied iv) Somewhat satisfied v) Very satisfied. 7. Customer and company co-relationship level is? i) Very dissatisfied ii) Somewhat dissatisfied iii) Neither satisfied nor dissatisfied iv) Somewhat satisfied v) Very satisfied. 8.Supply of product in the market is? i) Very dissatisfied ii) Somewhat dissatisfied iii) Neither satisfied nor dissatisfied iv) Somewhat satisfied v) Very satisfied. 9. Satisfaction about the availability Product varieties in market? i) Very dissatisfied ii) Somewhat dissatisfied iii) Neither satisf ied nor dissatisfied iv) Somewhat satisfied v) Very satisfied. 10. Satisfaction level regarding order receiving system. i) Very dissatisfied ii) Somewhat dissatisfied iii) neither satisfied nor dissatisfied iv) Somewhat satisfied v) Very satisfied